Sleep Mode Start Menu - MUTOH Valuejet VJ-2638 Operation Manual

Panel setup menu
5.6.2

Sleep Mode Start menu

Activate Sleep Mode
During Sleep Mode, "Restart -> Enter" is displayed on Operation panel.
During Sleep Mode, pressing [Enter] key will return the printer to Normal.
NOTE
• If the printer is under one of the following conditions while shifting to the Sleep Mode, "Don't Start
Sleep Mode" is displayed, and will not shift to the Sleep Mode.
• Front cover is open.
• Maintenance cover is open.
• Media loading lever is raised.
• The head height is set to High.
• Waste fluid tank is full.
• Ink cartridge is empty.
• Ink cartridge has been removed.
• An ink cartridge other than genuine Ink cartridges is inserted into Cartridge slot, etc.
Activate Sleep Mode again after returning the printer to a normal state.
7.2 Error messages
• If the printer is under one of the conditions above during the Sleep mode, the printer will not return
to the Normal condition even after pressing the [Enter] key.
Return the printer to a normal state, and press the [Enter] key to return the printer to normal
operation.
7.2 Error messages
Setup item
Start
216
Setting
Start Sleep Mode?
VJ-2638/1638/1638W OPERATION MANUAL
Description
• [Enter] key: activates Sleep Mode.
• [Cancel] key: shifts to the previous menu without activating
Sleep Mode.
5.6 Sleep Mode menu
The following content is displayed on Operation panel.
Restart --> Enter
• [Enter] key: return the printer to normal operation.
5.6 Sleep Mode menu