Product Specifications; Printer Specifications - MUTOH Valuejet VJ-2638 Operation Manual

Appendix
8.1

Product specifications

8.1.1

Printer specifications

Items
Model name
Printing method
Drive system
Media feed system
Media fixing system
Media feed/ejection
Roll media outer diameter
Roll media weight
Maximum media width
Minimum media width
Maximum media thickness
Maximum printable media width
Print margin
Media cut system
Head height adjustment
CPU
Memory
Command
Interface
Ink Supply system
Cartridges
294
VJ-2638/1638/1638W OPERATION MANUAL
VJ-1638W
On-demand piezo drive system
Firmware servo/DC motor drive
Multipoint pressurizing grid roller system
Pressurization roller down system by manual lever
Rear feed/Front ejection
150mm or less
30kg or less
1,625 mm
900 mm
0.3 mm (when the head height is Low)/1.3 mm (when the head height is Mid)/
2.8 mm (when the head height is High)
1,615 mm
Top: 5 mm (15 mm after media initialization or after winding the media
manually, 40 mm when media initialization front edge detection is ON or after
cutting the media), Bottom: 5 mm (102 mm at the roll media end), Left: 5 mm
to 25 mm, Right: 5 mm to 25 mm.
Horizontal automatic cut system/manual cut system
Three-level adjustment of Low, Mid, and High
64-bit RISC CPU
256 MB
MH-RTL (RTL-PASS)
Ethernet (10BASE-T/100BASE-TX)
Supplied through tubes from independent color cartridges
Black, Cyan, Magenta,
Yellow: 220ml ± 5ml each
Specification
VJ-1638 VJ-2638
250mm or less
100kg or less
2,642 mm
2,632 mm
384MB
Ethernet (10/100/
1000BASE-T)
Black, Cyan, Magenta, Yellow: 220ml ± 5ml
each or 440ml ± 5ml (1000ml ± 5ml when the
optional High-capacity ink pack adapter is used)
8.1 Product specifications