4.2 Status | Status; Figure 6-10. Status | Status Page - Comtech EF Data MBT-5003 Installation And Operation Manual

MBT-5003 L-Band Up/Down Converter System
Ethernet Management
6.5.5.4.2 Status | Status
The 'Status | Status' page (Figure 6-10) is a read-only page that provides the user with all
pertinent information about the MBT-5003 operating configuration:
•
General Information, including product identification (i.e., model and serial numbers),
active software image information, active operating temperature, and power readings for
the Base Unit, Converter A, and Converter B.
Note the following:
o Low Noise Amplifier (LNA) operation is not supported by the MBT-5003. All
o Valid Conv A/ConvB Forward RF Power readings are provided only if the
•
Firmware Information for Bootrom, Bulk Image#1 and Bulk Image #2.
•
Part Numbers for the Base Unit, Converter A, and Converter B.

Figure 6-10. Status | Status page

parameter readings associated with this feature are therefore invalid.
MBT-5003-XUR Up Converter is optionally configured with the Power Monitor
feature. These parameters otherwise will display as N/A if the pertinent converter
is an MBT-5003-XDR Down Converter.
6–20
Revision 1
MN-MBT5003