Config: Fltrec (Fault Recovery); Config: Conva Or Convb (Converter Unit 'A' Or Converter Unit 'B') - Comtech EF Data MBT-5003 Installation And Operation Manual

L-band up/down converter system

Hide thumbs

Table Of Contents

Table of Contents

MBT-5003 L-Band Up/Down Converter System

Front Panel Operation

If Trap is selected:

Trap Community: (◄ ►▲▼ E)

comtech

The user may view or edit the SNMP Trap Community string. To edit, first use the ◄

►arrows keys to select the character to edit, then the ▲ ▼ arrows keys to edit that

character. Press ENT when done.

If SNMP: Traps is selected:

SNMP Trap IP Address:

IP1 IP2 Version

Select IP1, IP2, or Version using the

If SNMP Trap IP Address: IP1 or IP2 is selected:

Trap IP #1:

000.000.000.000 (◄ ►▲▼ E)

Trap IP #2:

000.000.000.000 (◄ ►▲▼ E)

The user may edit the Trap Destination's IP Addresses. To edit, first use the ◄ ►

arrow keys to select the digit to edit, then the ▲ ▼ arrow keys to edit the value of that

digit. Press ENT when done.

Note: If both Trap IP Addresses are 000.000.000.000, it means Traps are disabled.

If SNMP Trap IP Address: Version is selected:

Trap Version:

SNMPv1

Select the trap version – SNMPv1 or SNMPv2 – using the ▲ ▼ arrow keys, then

press ENT.

5.3.1.2