6.5.3 Web Server Interface Access - Comtech EF Data MBT-5003 Installation And Operation Manual

MBT-5003 L-Band Up/Down Converter System
Ethernet Management
2. Start a Telnet session
with the unit at the
default IP address of
192.168.1.5:
3. Enter the Telnet username
and password (the default
for both parameters is
comtech):
Failure to enter the correct User name and Password will return the user to a blank login
screen.

6.5.3 Web Server Interface Access

Note: The IP Address can be found by following the pathway
Ethernet Address.
1. From the PC, type http://192.168.1.5 (the
default IP address for the MBT-5003) into
the Address area of the Web browser:
2. The Login window will appear, and the user is prompted to
type a User Name and Password:
Default User Name – comtech
Default Password – comtech
Type the User Name and Password, then click [OK].
Failure to enter the correct
User name and Password will
return the user to a blank
Login window. If multiple
invalid logins are attempted,
the browser will display the
following access
message:
See Chapter 5. FRONT PANEL OPERATION for further information.
error
6–6
Revision 1
MN-MBT5003
CONFIG: Remote Control