Screen Indications - Motorola CA50 Developer & User Manual

4 - 12 CA50/UCA Client & Server Developer & User Guide

Screen Indications

CA50 Display Screen Indications
Table 4-5
Event
Walkie-Talkie Indications
Start walkie-talkie
communication transmit
Start walkie-talkie
communication receive
Voice (Unicast) Call Indications
Receive a call
Make a call
Busy
Low battery
Scanning Indications
Active scanning/laser on
Successful decode
Network Indications
Connecting to
network/server
Connected to UCA
server
Connection failure
No connection/lost
connection
Lost Connection
*Option to Beep or Log the loss of RF Signal. This feature is controlled by the following reg keys:
[HKEY_LOCAL_MACHINE\Software\Motorola\UCAShell\UCAClient]
"SignalLossBeep"=dword:0
"SignalLossLog"=dword:0
Battery Charging Indications
Charge in progress
Charge complete
Charge error
No display
No display
Caller ID
Outbound caller ID
Outbound caller ID
The low battery image blinks
No display
Application dependent; no display by default
Connecting message
UCA client application
Error message
Error message
Device can be configured to Beep or log the loss of connection, disabled
by default*
; 0 - No Beep, 1 - Beep for signal loss
; 0 - No Log, 1 - Log of signal loss
Battery icon in charging state
Battery icon fully charged
Charge error message
Display Status