Chapter 3 Getting Started
Overview
This chapter shows the parts of the CA50 and provides information about installing/removing the battery, charging
the battery, sleep mode and powering the CA50 on.
Valuable topics in this chapter include:
• CA50 views
• Inserting and removing the battery
• Average charge time
• Charging batteries
• Battery management recommendations
• Powering on the CA50, pre-deployment
• CA menu
• Sleep mode
• Powering off the CA50
NOTE 1. For a complete checklist outlining all the development and deployment activities required to implement
a CA50 solution, see the
2. For a table listing the most commonly requested topics within this manual, see the Quick Startup Guide
on the last page of the manual.
Unpacking the CA50
Carefully remove all protective material from the CA50 and save the shipping container for later storage and
shipping. Verify that you received the following equipment:
•
CA50
•
Lithium-ion battery
•
Regulatory Guide
•
Quick Start Guide.
Inspect the equipment. If any equipment is missing or damaged, contact the Motorola Enterprise Mobility support
center immediately. See
(page
3-2)
(page
(page
3-7)
(page
3-8)
(page
3-12)
(page
3-13)
(page
3-13).
Development and Deployment Checklist on page
Service Information on page xxi
3-4)
(page
3-9)
(page
3-11)
for contact information.
2-1.