Motorola CA50 Developer & User Manual page 73

CA Menu Options (Continued)
Table 4-6
Menu
UCA NLedTest This application can be used to test the green and red LEDs and the vibrator motor on the
device.
To test the LEDs and vibrator motor on the CA50 device:
On the CA Menu, scroll to select Programs > UCA NLedTest.
1.
The application executes and the main NLed screen displays.
2.
On the main NLed screen scroll to GREEN LED and press Scan/Select to display the
3.
GREEN screen.
Scroll to ON and press Scan/Select. The green LED turns on.
4.
Scroll to OFF and press Scan/Select. The green LED turns off.
5.
Scroll to BLINK and press Scan/Select. The green LED blinks on and off five times then
6.
turns off.
Press the right soft key to go back to the main NLed screen.
7.
On the main NLed screen scroll to RED LED and press Scan/Select to display the RED
8.
screen.
Scroll to ON and press Scan/Select. The red LED turns on.
9.
Scroll to OFF and press Scan/Select. The red LED turns off.
10.
Scroll to BLINK and press Scan/Select. The red LED blinks on and off five times then
11.
turns off.
Press the right soft key to go back to the main NLed screen.
12.
(UCA NLedTest continues on the next page)
CA50 Modes of Operation 4 - 25
Description