Page of 450
Download TroubleshootingTroublesh.. Print This PagePrint Bookmark
   
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450

Advertisement

LI4278
PRODUCT REFERENCE
GUIDE

Advertisement

   Summary of Contents for Motorola LI4278

  • Page 1

    LI4278 PRODUCT REFERENCE GUIDE...

  • Page 3: Product Reference Guide

    LI4278 PRODUCT REFERENCE GUIDE 72E-151834-02 Revision A April 2013...

  • Page 4

    Motorola. No right to copy a licensed program in whole or in part is granted, except as permitted under copyright law. The user shall not modify, merge, or incorporate any form or portion of a licensed program with other program material, create a derivative work from a licensed program, or use a licensed program in a network without written permission from Motorola.

  • Page 5: Revision History

    Revision History Changes to the original guide are listed below: Change Date Description -01 Rev. A 1/2012 Initial Release -02 Rev. A 4/2013 Added: - HID features for Apple iOS - Unsolicited Heartbeat Interval - Dump Scanner Parameters - Changed Parameter #s to Attribute #s - Added attribute #s.

  • Page 6

    LI4278 PRODUCT REFERENCE GUIDE...

  • Page 7: Table Of Contents

    TABLE OF CONTENTS Warranty ............................ii Revision History ..........................iii About This Guide Introduction ............................. xv Scanner Configurations ........................xv Related Product Line Configurations ....................xvii Chapter Descriptions ........................xxi Notational Conventions........................xxii Related Documents ........................xxiii Service Information ......................... xxiii Chapter 1: GETTING STARTED Introduction ............................

  • Page 8: Table Of Contents

    LI4278 PRODUCT REFERENCE GUIDE Inserting the Linear Imager Scanner in the Cradle ................ 1-14 Inserting Linear Imager Scanner in the CR0078-S/CR0008-S Cradle ........1-14 Horizontal Cradle Mount ....................1-14 Vertical Cradle Mount ......................1-14 Inserting/Removing Linear Imager Scanner in the CR0078-P Cradle ........1-15 Wall Mount Bracket Template ......................

  • Page 9: Table Of Contents

    Table of Contents HID Country Keyboard Types (Country Codes) ............... 4-8 HID Keyboard Keystroke Delay ....................4-10 HID CAPS Lock Override ......................4-10 HID Ignore Unknown Characters ..................... 4-11 Emulate Keypad ........................4-11 HID Keyboard FN1 Substitution ....................4-12 HID Function Key Mapping ...................... 4-12 Simulated Caps Lock .......................

  • Page 10: Table Of Contents

    LI4278 PRODUCT REFERENCE GUIDE Parameter Bar Code Scanning ....................5-5 Beep After Good Decode ......................5-6 Decode Illumination Indicator ....................5-6 Beeper Tone ..........................5-7 Suppress Power Up Beeps ...................... 5-8 Beeper Volume ........................5-8 Beeper Duration ........................5-9 Hand-Held Trigger Mode ......................

  • Page 11: Table Of Contents

    Table of Contents Chapter 7: RS-232 INTERFACE Introduction ............................ 7-1 Connecting an RS-232 Interface ....................7-2 RS-232 Parameter Defaults ......................7-3 RS-232 Host Parameters ....................... 7-4 RS-232 Host Types ........................7-6 Baud Rate ..........................7-8 Parity ............................7-9 Stop Bit Select ......................... 7-9 Data Bits (ASCII Format) ......................

  • Page 12: Table Of Contents

    LI4278 PRODUCT REFERENCE GUIDE Chapter 9: IBM INTERFACE Introduction ............................ 9-1 Connecting to an IBM 468X/469X Host ..................9-2 IBM Parameter Defaults ........................ 9-3 IBM 468X/469X Host Parameters ....................9-4 Port Address ..........................9-4 Convert Unknown to Code 39 ....................9-5 Optional IBM Parameters ......................

  • Page 13: Table Of Contents

    Table of Contents Enable/Disable GS1-128 (formerly UCC/EAN-128) ..............11-25 Enable/Disable ISBT 128 ......................11-25 ISBT Concatenation ......................... 11-26 Check ISBT Table ........................11-27 ISBT Concatenation Redundancy .................... 11-27 Code 39 ............................11-28 Enable/Disable Code 39 ......................11-28 Enable/Disable Trioptic Code 39 ..................... 11-28 Convert Code 39 to Code 32 ....................

  • Page 14: Table Of Contents

    LI4278 PRODUCT REFERENCE GUIDE Matrix 2 of 5 ........................... 11-56 Enable/Disable Matrix 2 of 5 ....................11-56 Set Lengths for Matrix 2 of 5 ....................11-56 Matrix 2 of 5 Check Digit ......................11-58 Transmit Matrix 2 of 5 Check Digit ................... 11-58 Korean 3 of 5 ..........................

  • Page 15: Table Of Contents

    Table of Contents xiii Actions ............................12-24 Send Data ..........................12-24 Setup Field(s) ........................... 12-27 Move Cursor ........................12-28 Send Pause ........................12-29 Skip Ahead ......................... 12-30 Skip Back .......................... 12-31 Send Preset Value ......................12-33 Modify Data ..........................12-33 Remove All Spaces ......................

  • Page 16

    LI4278 PRODUCT REFERENCE GUIDE Appendix E: ALPHANUMERIC BAR CODES Alphanumeric Keyboard ........................ E-1 Appendix F: ASCII CHARACTER SETS Index Glossary...

  • Page 17: About This Guide

    ABOUT THIS GUIDE Introduction The LI4278 Product Reference Guide provides general instructions for setting up, operating, maintaining, and troubleshooting the LI4278 linear imager scanner and cradles. Scanner Configurations lists the linear imager scanner configurations. Table 2-1 NOTE Check Solution Builder for the latest available model configurations.

  • Page 18

    APAC LI4278-SR20001WR LI4278 Linear Imager - Cash Register White LI4278-PRBU2100AAR Kit: LI4278 Linear Imager, Presentation Cradle, USB Series A 7 ft. Straight Cable - Black, PS (Country LC Required) LI4278-PRWU2100AAR Kit: LI4278 Linear Imager, Presentation Cradle, USB Series A 7 ft.

  • Page 19

    Kit: LI4278 Linear Imager, Cradle (Radio/Charger), USB Series A, 7 ft. Straight Cable - White, P/S is NOT Required Related Product Line Configurations lists the configurations of product lines related to the LI4278 linear imager scanner. Table 2-2 NOTE Check Solution Builder for:...

  • Page 20

    LI4278 PRODUCT REFERENCE GUIDE Cradle, Power Supply, Battery, Miscellaneous Configurations (Continued) Table 2-2 Product Line Part # Description CBA-D02-C09ZAR Cable - Scanner Emulation: 9 ft. (2.8m) Coiled, Undecoded Universal Cables CBA-K01-S07PAR Cable - Keyboard Wedge: 7 ft. (2m) Straight, PS/2 Power Port CBA-K02-C09PAR Cable - Keyboard Wedge: 9 ft.

  • Page 21

    About This Guide Cradle, Power Supply, Battery, Miscellaneous Configurations (Continued) Table 2-2 Product Line Part # Description CBA-S03-C09ZAR Synapse Adapter Cable: 9 ft. Coiled. Cable Code S03 Universal Cables CBA-S04-C16ZAR Synapse Adapter Cable: 16 ft. Coiled (continued) CBA-S05-S09EAR Synapse Adapter Cable with EAS 9 ft. Straight. Cable Code S05 CBA-U01-S07ZAR Cable - USB: Series A Connector, 7 ft.

  • Page 22

    LI4278 PRODUCT REFERENCE GUIDE Cradle, Power Supply, Battery, Miscellaneous Configurations (Continued) Table 2-2 Product Line Part # Description PWRS-14000-253R Power Supply: 5VDC,850MA, US-CA-MX-JP-TW Power Supplies and PWRS-14000-256R Power Supply: 5VDC,850MA, EU-UK-EMEA-RU-ZA Line Cords 50-14000-259R Power Supply: 5VDC,850MA, ARGENTINA-UY PWRS-14000-255R Power Supply: 5VDC, 850MA, Brazil/Korea, Must order line cord...

  • Page 23: Aim Code Identifiers

    About This Guide Chapter Descriptions Topics covered in this guide are as follows: provides a product overview, unpacking instructions, and cable • Chapter 1, GETTING STARTED connection information. describes parts of the linear imager scanner, beeper and LED definitions, and •...

  • Page 24

    LI4278 PRODUCT REFERENCE GUIDE Notational Conventions The following conventions are used in this document: Italics are used to highlight chapters and sections in this and related documents. • Bold text is used to highlight parameter names and options. •...

  • Page 25

    Software type and version number • Motorola responds to calls by e-mail, telephone or fax within the time limits set forth in service agreements. If your problem cannot be solved by Motorola Solutions support, you may need to return your equipment for servicing and will be given specific directions.

  • Page 26

    LI4278 PRODUCT REFERENCE GUIDE...

  • Page 27: Chapter 1: Getting Started Introduction

    CHAPTER 1 GETTING STARTED Introduction The world class LI4278 linear imager scanner, first in a family of high performance linear imagers from Motorola, offers customers a cost effective, cordless 1D bar code scanner which out performs all existing linear imagers and established Motorola as a leader in imager bar code readers.

  • Page 28: Interfaces

    Unpacking the Linear Imager Scanner and Cradle Remove the scanner and cradle from their respective packing and inspect for damage. If the scanner or cradle was damaged in transit, contact Motorola Solutions Support. See for contact information. KEEP page xxiii THE PACKING.

  • Page 29: Parts

    GETTING STARTED 1 - 3 Parts Scanner Beeper Scan Window Battery Door Trigger Metal Charging Contacts Parts of the Linear Imager Scanner Figure 1-2...

  • Page 30: Cr0078-s/cr0008-s Series Cradle

    1 - 4 LI4278 Product Reference Guide CR0078-S/CR0008-S Series Cradle Pairing Bar Code (cradle serial #) (CR0078-S only) Convertible Mount Hook Cradle Power Latch Latch Charging/ Communications Contacts CR0078-S/CR0008-S Series Cradle Front View Figure 1-3...

  • Page 31

    GETTING STARTED 1 - 5 Mounting Hole Rubber Foot Rubber Foot Host Cable Hook Power Cable Hook Power Port Host Port (Applies to CR0078-S only) Host Cable Groove Power Cable Groove Desk/Wall Mount Converter Knob Rubber Foot Rubber Foot Mounting Hole CR0078-S/CR0008-S Series Cradle Back View Figure 1-4...

  • Page 32: Cr0078-p Series Cradle

    1 - 6 LI4278 Product Reference Guide CR0078-P Series Cradle Latch Charging/ Communication Contacts Page Button CR0078-P Cradle Top View Figure 1-5 Power Cable Host Cable Groove Groove Rubber Foot Rubber Foot Host Cable Groove Power Cable Groove Cable Support Hook...

  • Page 33: Linear Imager Scanner Cradle

    GETTING STARTED 1 - 7 Linear Imager Scanner Cradle The scanner cradles (CR0078-S and CR0078-P) serve as a stand, charger, and host interface for the linear imager scanner. The cradle sits on a desktop. The CR0078-S cradle can also be mounted on a vertical surface (such as a wall).

  • Page 34: Connecting The Cr0078-s/cr0008-s Series Cradle

    1 - 8 LI4278 Product Reference Guide Connecting the CR0078-S/CR0008-S Series Cradle IMPORTANT Connect the interface cable and power supply (if necessary) in the following order to ensure proper operation of the linear imager scanner and cradle. If a power supply is connected to the cradle, disconnect it. See Figure 1-7.

  • Page 35: Connecting The Cr0078-p Series Cradle

    GETTING STARTED 1 - 9 Connecting the CR0078-P Series Cradle IMPORTANT Connect the interface cable and power supply in the following order to ensure proper operation of the linear imager scanner and cradle. Insert the interface cable into the cradle’s host port. Connect the other end of the interface cable to the host.

  • Page 36: Lost Connection To Host

    1 - 10 LI4278 Product Reference Guide Lost Connection to Host If scanned data does not transmit to the cradle’s host, ensure that all cables are firmly inserted and the power supply is connected to an appropriate AC outlet. If scanned data still does not transmit to the host, reestablish a connection with the host: Disconnect the power supply from the cradle.

  • Page 37: Replacing The Linear Imager Scanner Battery

    GETTING STARTED 1 - 11 Replacing the Linear Imager Scanner Battery The battery is installed in the cordless linear imager scanner by the factory and resides in a chamber in the linear imager scanner handle. To replace the battery: Insert a Phillips screwdriver in the screw at the base of the linear imager scanner, then turn the screw counterclockwise to release the latch.

  • Page 38: Charging The Linear Imager Scanner Battery

    1 - 12 LI4278 Product Reference Guide Charging the Linear Imager Scanner Battery Fully charge the linear imager scanner battery before using the linear imager scanner for the first time. To charge the linear imager scanner battery, place the linear imager scanner in the cradle, ensuring that the metal contacts on the bottom of the linear imager scanner touch the contacts on the cradle.

  • Page 39: Reconditioning The Linear Imager Scanner Battery

    GETTING STARTED 1 - 13 Reconditioning the Linear Imager Scanner Battery To maintain optimal performance of the linear imager scanner NiMH battery, perform a battery recondition approximately once a year. To begin the battery recondition cycle: Scan Battery Recondition below. Battery Recondition Place the linear imager scanner into the cradle.

  • Page 40: Inserting The Linear Imager Scanner In The Cradle

    1 - 14 LI4278 Product Reference Guide Inserting the Linear Imager Scanner in the Cradle Insert the linear imager scanner in the cradle so that the metal contacts on the bottom of the linear imager scanner handle touch the contacts on the cradle. Push the handle lightly to ensure a proper connection, engaging the contacts in the cradle and linear imager scanner.

  • Page 41: Inserting/removing Linear Imager Scanner In The Cr0078-p Cradle

    GETTING STARTED 1 - 15 Ensure the desk/wall mount converter knob is in the position shown in Figure 1-11. Desk/Wall Mount Converter Knob Vertical Mount - Inserting the Linear Imager Scanner in the Cradle Figure 1-11 Inserting/Removing Linear Imager Scanner in the CR0078-P Cradle To insert the scanner in the Presentation Cradle: Insert the scanner by placing the bottom of the scanner, at a slight forward angle, into the CR0078-P cradle.

  • Page 42

    1 - 16 LI4278 Product Reference Guide Click Removing the Linear Imager Scanner in the Presentation Cradle Figure 1-13...

  • Page 43: Wall Mount Bracket Template

    GETTING STARTED 1 - 17 Wall Mount Bracket Template For your convenience, a wall mount bracket can be purchased from Motorola. Use the mounting holes on the Wall Mount Bracket or use the template in to determine the location of the screw holes.

  • Page 44: Radio Communications

    1 - 18 LI4278 Product Reference Guide Radio Communications The linear imager scanner can communicate with remote devices via Bluetooth Technology Profile Support, or by pairing with a cradle. For radio communication parameters, detailed information about operational modes, Bluetooth Technology Profile Support and pairing, see Chapter 4, RADIO COMMUNICATIONS.

  • Page 45

    GETTING STARTED 1 - 19 To attach the lanyard: Open the battery door latch as described in Replacing the Linear Imager Scanner Battery on page 1-11. Do not remove the battery. Hook the loop of the lanyard around the screw container inside the battery door latch, between the loop guides.

  • Page 46

    1 - 20 LI4278 Product Reference Guide...

  • Page 47: Chapter 2: Scanning Introduction

    CHAPTER 2 SCANNING Introduction This chapter provides beeper and LED definitions, scanning techniques, general instructions and tips about scanning, and decode ranges. Beeper and LED Definitions The linear imager scanner issues different beep sequences/patterns and an LED display to indicate status. defines beep sequences/patterns and LED displays which occur during both normal scanning and Table 2-1 while programming the linear imager scanner.

  • Page 48

    2 - 2 LI4278 Product Reference Guide Scanner Beeper and LED Definitions (Continued) Table 2-1 Beeper Sequence LED Indication Indication Four long low beeps 1. A transmission error was detected in a scanned symbol. The data is ignored. This occurs if a unit is not properly configured.

  • Page 49: Cancel

    SCANNING 2 - 3 Scanner Beeper and LED Definitions (Continued) Table 2-1 Beeper Sequence LED Indication Indication Long low/long high/long None Connection attempt was rejected by remote device. low/long high beeps Note: In the case of 4-23, the Pairing Methods on page cradle may already be connected to another linear imager scanner in single Point-to-Point locked mode, or the piconet may be full in Multipoint-to-Point mode.

  • Page 50

    2 - 4 LI4278 Product Reference Guide Scanner Beeper and LED Definitions (Continued) Table 2-1 Beeper Sequence LED Indication Indication Three long high beeps None Code 39 buffer is full. High/low/high beeps None The Code 39 buffer was erased/cleared. Low/high/low beeps...

  • Page 51: Cradle Led Definitions

    SCANNING 2 - 5 Cradle LED Definitions IMPORTANT When the scanner is inserted into the CR0078-S (standard) cradle, the scanner's LED is used as the charging indicator. When the scanner is inserted into the CR0078-P (presentation) cradle, the cradle's LED is used as the charging indicator.

  • Page 52: Scanning

    2 - 6 LI4278 Product Reference Guide Scanning To program the linear imager scanner, see the appropriate host chapter, Chapter 4, RADIO SYMBOLOGIES. (In addition to the parameters included in the chapters COMMUNICATIONS Chapter 11, mentioned, user preference and miscellaneous linear imager scanner option parameters are also available in this guide.)

  • Page 53: Hands-free Scanning

    SCANNING 2 - 7 Hands-Free Scanning The linear imager scanner is in hands-free (presentation) mode when it sits in the CR0078-P cradle. In this mode the linear imager scanner operates in continuous (constant-on) mode, where it automatically decodes a bar code presented in the field of view. The scanner LED is on, solid green To scan: Ensure all connections are secure (see appropriate host chapter).

  • Page 54: Decode Ranges

    2 - 8 LI4278 Product Reference Guide Decode Ranges Ranges are calculated on Code 39 except where noted. LI4278 Decode Ranges Table 2-3 Typical Working Ranges Symbol Density Bar Code Type Near 4 mil Code 39 4 in. (10.2 cm) 10.0 in.

  • Page 55: Maintenance

    This chapter provides suggested linear imager scanner and cradle maintenance, troubleshooting, technical specifications, and signal descriptions (pinouts). Maintenance Known Harmful Ingredients The following chemicals are known to damage the plastics on Motorola scanners/cradles and should not come in contact with the device: • Acetone • Ammonia solutions •...

  • Page 56: Cleaning The Linear Imager Scanner

    Rub the cotton portion of the cotton-tipped applicator back-and-forth across the connector on the Motorola scanner at least 3 times. Do not leave any cotton residue on the connector. Use the cotton-tipped applicator dipped in alcohol to remove any grease and dirt near the connector area.

  • Page 57: Battery Information

    104° F (0° C to 40°C) temperature range. The standard warranty period for all Motorola batteries is 30 days, regardless if the battery was purchased separately or included as part of the linear imager scanner. For more information on batteries, please visit:...

  • Page 58: Troubleshooting

    If after performing the possible solutions in the symbol still does not scan, contact the distributor Table 3-1 or contact the Motorola Solutions Global Customer Support Center. See for contact information. page xxiii Troubleshooting...

  • Page 59

    MAINTENANCE, TROUBLESHOOTING & TECHNICAL SPECIFICATIONS 3 - 5 Troubleshooting (Continued) Table 3-1 Problem Possible Causes Possible Solutions Linear imager scanner emits long Out of host parameter storage Scan Default Parameters on page low/long high/long low/long high space. 5-4. beeps. Out of memory for ADF rules. Reduce the number of ADF rules or the number of steps in the ADF rules.

  • Page 60

    3 - 6 LI4278 Product Reference Guide Troubleshooting (Continued) Table 3-1 Problem Possible Causes Possible Solutions Linear imager scanner emits five low Conversion or format error. Check ADF rules for the host. long beeps. Linear imager scanner emits a Communication with the bus was...

  • Page 61

    MAINTENANCE, TROUBLESHOOTING & TECHNICAL SPECIFICATIONS 3 - 7 Troubleshooting (Continued) Table 3-1 Problem Possible Causes Possible Solutions Linear imager scanner emits five Conversion or format error was Ensure the linear imager scanner’s long low beep after a bar code is detected.

  • Page 62

    3 - 8 LI4278 Product Reference Guide Troubleshooting (Continued) Table 3-1 Problem Possible Causes Possible Solutions Linear imager scanner is For Synapse or IBM-468x mode, disabled. enable the linear imager scanner via the host interface. The red illumination does not appear No power to the linear imager Check battery and charging contacts;...

  • Page 63: Technical Specifications

    MAINTENANCE, TROUBLESHOOTING & TECHNICAL SPECIFICATIONS 3 - 9 Technical Specifications Technical Specifications - LI4278 Linear Imager Scanner Table 3-2 Item Description Physical Characteristics Dimensions 3.84 in. H x 2.75 in. W x 7.34 in. L 9.8 cm H x 7 cm W x 18.6 cm L Weight (with battery) Approximately 7.9 oz.

  • Page 64

    3 - 10 LI4278 Product Reference Guide Technical Specifications - LI4278 Linear Imager Scanner (Continued) Table 3-2 Item Description Storage Temperature -40° to 158° F (-40° to 70° C) Charging Temperature 32° to 104° F (0° to 40° C) nominal, 41° to 95° F (5° to 35° C) ideal...

  • Page 65

    MAINTENANCE, TROUBLESHOOTING & TECHNICAL SPECIFICATIONS 3 - 11 Technical Specifications - CR0078-S/CR0008-S Cradle (Continued) Table 3-3 Item Description Performance Characteristics Interfaces Supported Features on-board Multiple Interface with: RS-232C (Standard, Nixdorf, ICL, & Fujitsu); IBM 468x/469x; Keyboard Wedge; USB (Standard, IBM SurePOS, Macintosh); SSI; (CR0078-S only) 123Scan ;...

  • Page 66

    3 - 12 LI4278 Product Reference Guide Technical Specifications - CR0078-P Cradle (Continued) Table 3-4 Item Description Charging Temperature 32° to 104° F (0° to 40° C) nominal, 41° to 95° F (5° to 35° C) ideal Humidity 5% to 95% (non-condensing)

  • Page 67: Cradle Signal Descriptions

    MAINTENANCE, TROUBLESHOOTING & TECHNICAL SPECIFICATIONS 3 - 13 Cradle Signal Descriptions The signal descriptions in apply to the connector on the linear imager scanner and are for reference Table 3-5 only. Cradle Signal Pin-outs Table 3-5 Keyboard Synapse RS-232 Wedge Reserved SynClock Reserved...

  • Page 68

    3 - 14 LI4278 Product Reference Guide The signal descriptions in apply to the connector from the linear imager scanner to the linear imager Table 3-6 scanner cradle and are for reference only. Cradle Pin-outs Table 3-6 Description CRADLE_TXD CRADLE_RXD...

  • Page 69: Chapter 4: Radio Communications Introduction

    CHAPTER 4 RADIO COMMUNICATIONS Introduction This chapter provides information about the modes of operation and features available for wireless communication between linear imager scanners, cradles and hosts. The chapter also includes the parameters necessary to configure the linear imager scanner. The linear imager scanner ships with the settings shown in the Radio Communication Default Table on page (also see...

  • Page 70: Radio Communications Parameter Defaults

    4 - 2 LI4278 Product Reference Guide Radio Communications Parameter Defaults lists the defaults for radio communication parameters. If you wish to change any option, scan the Table 4-1 appropriate bar code(s) provided in the Radio Communications Parameters section beginning on page 4-3.

  • Page 71: Wireless Beeper Definitions, Radio Communications Host Types

    RADIO COMMUNICATIONS 4 - 3 Radio Communication Default Table (Continued) Table 4-1 Parameter Page Parameter Default Number Number Authentication Disable 4-30 PIN Code (Set and Store) 12345 4-31 Variable Pin Code Static 4-31 (Default PIN code is 12345) Encryption Disable 4-32 Batch Mode Normal (Do Not Batch...

  • Page 72

    4 - 4 LI4278 Product Reference Guide Radio Communications Host Types (continued) Cradle Host Serial Port Profile (Master) Serial Port Profile (Slave) Bluetooth Keyboard Emulation (HID Slave)

  • Page 73: Bluetooth Technology Profile Support

    RADIO COMMUNICATIONS 4 - 5 Bluetooth Technology Profile Support With Bluetooth Technology Profile Support, the cradle is not required for wireless communication. The linear imager scanner communicates directly to the host using Bluetooth technology. The linear imager scanner supports the standard Bluetooth Serial Port Profile (SPP) and HID Profiles which enable the linear imager scanner to communicate with other Bluetooth devices that support these profiles.

  • Page 74: Bluetooth Friendly Name, Discoverable Mode

    Select General Discoverable Mode when initiating connection from a PC. • Select Limited Discoverable Mode when initiating connection from a mobile device (e.g., Motorola Q), • and the device does not appear in General Discoverable Mode. Note that it can take longer to discover the device in this mode.

  • Page 75: Hid Host Parameters, Hid Features For Apple Ios

    RADIO COMMUNICATIONS 4 - 7 HID Host Parameters The linear imager scanner supports virtual keyboard emulation for the Apple iOS, and keyboard emulation over the Bluetooth HID profile. In this mode the linear imager scanner can interact with Bluetooth enabled hosts supporting the HID profile as a Bluetooth keyboard.

  • Page 76: Hid Country Keyboard Types (country Codes)

    4 - 8 LI4278 Product Reference Guide HID Country Keyboard Types (Country Codes) Following are the keyboard parameters supported by the HID host. Scan the bar code corresponding to the keyboard type. North American Standard Keyboards French Windows French Canadian Windows 98...

  • Page 77

    RADIO COMMUNICATIONS 4 - 9 HID Country Keyboard Types (continued) Swedish Windows UK English Windows Japanese Windows French Canadian Windows 2000/XP Portuguese/Brazilian Windows...

  • Page 78: Hid Keyboard Keystroke Delay

    4 - 10 LI4278 Product Reference Guide HID Keyboard Keystroke Delay This parameter sets the delay, in milliseconds, between emulated keystrokes. Scan a bar code below to increase the delay when the HID host requires a slower transmission of data.

  • Page 79: Hid Ignore Unknown Characters

    RADIO COMMUNICATIONS 4 - 11 HID Ignore Unknown Characters This option applies only to the HID Keyboard Emulation device and IBM device. Unknown characters are characters the host does not recognize. When Send Bar Codes With Unknown Characters is selected, all bar code data is sent except for unknown characters, and no error beeps sound.

  • Page 80: Hid Keyboard Fn1 Substitution

    4 - 12 LI4278 Product Reference Guide HID Keyboard FN1 Substitution When enabled, this parameter allows replacement of any FN1 character in an EAN128 bar code with a Key Category and value chosen by the user. See to set the Key Category FN1 Substitution Values on page 5-21 and Key Value.

  • Page 81: Simulated Caps Lock

    RADIO COMMUNICATIONS 4 - 13 Simulated Caps Lock When enabled, the linear imager scanner inverts upper and lower case characters on the linear imager scanner bar code as if the Caps Lock state is enabled on the keyboard. This inversion is done regardless of the current state of the keyboard Caps Lock state.

  • Page 82: Auto-reconnect Feature

    4 - 14 LI4278 Product Reference Guide Auto-reconnect Feature When in SPP Master or Cradle Host mode, the linear imager scanner automatically tries to reconnect to a remote device when a disconnection occurs that is due to the radio losing communication. This can happen if the linear imager scanner goes out of range with the remote device, or if the remote device powers down.

  • Page 83: Reconnect Attempt Beep Feedback

    RADIO COMMUNICATIONS 4 - 15 Reconnect Attempt Beep Feedback Parameter # 559 When a linear imager scanner disconnects as it goes out of range, it immediately attempts to reconnect. While the linear imager scanner attempts to reconnect, the green LED continues to blink. If the auto-reconnect process fails, the linear imager scanner emits a page timeout beep (long low/long high) and stops blinking the LED.

  • Page 84: Reconnect Attempt Interval

    4 - 16 LI4278 Product Reference Guide Reconnect Attempt Interval Parameter # 558 When a linear imager scanner disconnects as it goes out of range, it immediately attempts to reconnect for the default time interval of 30 seconds. This time interval can be changed to one of the options below.

  • Page 85

    RADIO COMMUNICATIONS 4 - 17 Attempt to Reconnect for 5 Minutes (60) Attempt to Reconnect for 30 Minutes (360) Attempt to Reconnect for 1 Hour (720) Attempt to Reconnect Indefinitely...

  • Page 86: Auto-reconnect In Bluetooth Keyboard Emulation (hid Slave) Mode

    4 - 18 LI4278 Product Reference Guide Auto-reconnect in Bluetooth Keyboard Emulation (HID Slave) Mode Parameter # 604 In Bluetooth Keyboard Emulation (HID Slave) mode, select a re-connect option for when the linear imager scanner loses its connection with a remote device: Auto-reconnect on Bar Code Data: The linear imager scanner auto-reconnects when you scan a bar •...

  • Page 87: Out Of Range Indicator, Beep On Insertion

    RADIO COMMUNICATIONS 4 - 19 Out of Range Indicator An out of range indicator can be set by scanning Enable Beep on Reconnect Attempt (1) on page 4-15 extending the time using the Reconnect Attempt Interval on page 4-16. For example, with Beep on Reconnect Attempt disabled while the linear imager scanner loses radio connection when it is taken out of range, the linear imager scanner attempts to reconnect silently during the time interval set by scanning a Reconnect Attempt Interval.

  • Page 88: Linear Imager Scanner(s) To Cradle Support, Modes Of Operation

    4 - 20 LI4278 Product Reference Guide Linear Imager Scanner(s) To Cradle Support Modes of Operation Parameter # 538 The charging cradle with radio supports two radio communication modes of operation, allowing the linear imager scanner to communicate wirelessly: Point-to-Point •...

  • Page 89: Parameter Broadcast (cradle Host Only), Parameter Broadcast (cradle Host Only)

    RADIO COMMUNICATIONS 4 - 21 Parameter Broadcast (Cradle Host Only) Parameter # 148 NOTE When Parameter Broadcast is disabled on one scanner in the piconet, Parameter Broadcast is disabled on all scanners in the piconet. When in multipoint-to-point mode, enable Parameter Broadcast to broadcast all parameter bar codes scanned to all other linear imager scanners in the piconet.

  • Page 90: Pairing Modes

    4 - 22 LI4278 Product Reference Guide Pairing Modes Parameter # 542 When operating with the cradle, two modes of pairing are supported: Locked Pairing Mode - When a cradle is paired (connected) to the linear imager scanner (or up to three •...

  • Page 91: Pairing Methods

    Unpair the linear imager scanner from the cradle or PC/host to make the cradle available for pairing with another linear imager scanner. Scan the bar code below to disconnect the linear imager scanner from its cradle/PC host. An unpairing bar code is also included in the LI4278 Quick Reference Guide. Unpairing...

  • Page 92: Pairing Bar Code Format, Connection Maintenance Interval

    4 - 24 LI4278 Product Reference Guide Pairing Bar Code Format When the linear imager scanner is configured as an SPP Master, you must create a pairing bar code for the remote Bluetooth device to which the linear imager scanner can connect. The Bluetooth address of the remote device must be known.

  • Page 93

    RADIO COMMUNICATIONS 4 - 25 Connection Maintenance Interval (continued) To set the Connection Maintenance Interval, scan one of the bar codes below Set Interval to 15 Minutes Set Interval to 30 Minutes Set Interval to 60 Minutes Set Interval to 2 Hours...

  • Page 94

    4 - 26 LI4278 Product Reference Guide Connection Maintenance Interval (continued) Set Interval to 4 Hours Set Interval to 8 Hours Set Interval to 24 Hours Set Interval to Forever...

  • Page 95: Batch Mode

    RADIO COMMUNICATIONS 4 - 27 Batch Mode Parameter # 544 IMPORTANT Batch mode does not apply to SPP Slave Mode. The linear imager scanner supports three versions of batch mode. When the linear imager scanner is configured for any of the batch modes, it attempts to store bar code data (not parameter bar codes) until transmission is initialized, or the maximum number of bar codes are stored.

  • Page 96

    4 - 28 LI4278 Product Reference Guide Batch Mode (continued) Normal (00h) Out of Range Batch Mode (01h) Standard Batch Mode (02h) Cradle Contact Batch Mode (03h) Enter Batch Mode Send Batch Data...

  • Page 97: Page Button

    RADIO COMMUNICATIONS 4 - 29 Page Button Parameter # 746 The CR0078-P cradle offers a page button (see 1-6). The page button is a CR0078-P Series Cradle on page sensor that when touched, causes paired scanners to emit a beeping sequence. The default is Disable Page Button.

  • Page 98: Bluetooth Security

    4 - 30 LI4278 Product Reference Guide Bluetooth Security The linear imager scanner supports Bluetooth Authentication and Encryption. Authentication can be requested by either the remote device or the linear imager scanner. Once Authentication is complete, either device may then negotiate to enable Encryption.

  • Page 99: Pin Code

    RADIO COMMUNICATIONS 4 - 31 PIN Code Parameter # 552 To set and store a PIN code (e.g., password) on the linear imager scanner to connect to the host: Scan the Set & Store PIN Code bar code below. Scan five alphanumeric programming bar codes using the alphanumeric bar codes beginning on page E-1.

  • Page 100: Encryption

    4 - 32 LI4278 Product Reference Guide Encryption Parameter # 550 NOTE Authentication must be performed before Encryption can take effect. To set up the linear imager scanner for enabling Encryption, scan Enable Encryption. To prevent the linear imager scanner from enabling Encryption, scan Disable Encryption. When enabled, the radio encrypts data...

  • Page 101

    RADIO COMMUNICATIONS 4 - 33 Secure Simple Pairing IO Capability (SPP Server and SPP Master Host Mode Only) Parameter # 911 Bluetooth 2.1 uses The Secure Simple Pairing method to authenticate devices and create an encryption key. As a part of that algorithm, the device must state its IO capabilities. When in Serial Profile Host (master or slave), the default is No Input/No Output and no user interaction is required;...

  • Page 102: Bluetooth Radio, Linking, And Batch Operation

    Bluetooth Radio, Linking, and Batch Operation The LI4278 linear imager scanner has a Bluetooth Class 2 radio which achieves a range of at least 135m / 440ft (open air, line of sight). The actual range you achieve is influenced by the presence of other radios, shelving and wall materials as well as which cradle is tested.

  • Page 103

    CHAPTER 5 USER PREFERENCES & MISCELLANEOUS SCANNER OPTIONS Introduction If desired, program the linear imager scanner to perform various functions, or activate different features. This chapter describes imaging preference features and provides programming bar codes for selecting these features. The linear imager scanner ships with the settings in (also User Preferences Parameter Defaults on page 5-2 for all host device and miscellaneous defaults).

  • Page 104: Scanning Sequence Examples

    5 - 2 LI4278 Product Reference Guide Scanning Sequence Examples In most cases scanning one bar code sets the parameter value. For example, to set the beeper tone to high, scan the High Frequency (beeper tone) bar code listed under 5-7.

  • Page 105: Table Of Contents

    USER PREFERENCES & MISCELLANEOUS SCANNER OPTIONS 5 - 3 Parameter Page Parameter Default Number Number Time Delay to Low Power Mode 100 msec 5-11 Time Delay to Presentation Sleep Mode 5 Min 5-12 Timeout to Low Power Mode from Auto Aim 15 sec 5-14 Continuous Bar Code Read...

  • Page 106: User Preferences

    5 - 4 LI4278 Product Reference Guide User Preferences Default Parameters The scanner can be reset to two types of defaults: factory defaults or custom defaults. Scan the appropriate bar code below to reset the scanner to its default settings and/or set the scanner’s current settings as the custom default.

  • Page 107: Report Version

    USER PREFERENCES & MISCELLANEOUS SCANNER OPTIONS 5 - 5 Report Version Scan the bar code below to report the version of software installed in the linear imager scanner. Report Software Version Parameter Bar Code Scanning Parameter # 236 To disable the decoding of parameter bar codes, including the Set Defaults parameter bar codes, scan the Disable Parameter Scanning bar code below.

  • Page 108: Beep After Good Decode

    5 - 6 LI4278 Product Reference Guide Beep After Good Decode Parameter # 56 Scan a bar code below to select whether or not the linear imager scanner beeps after a good decode. If selecting Do Not Beep After Good Decode, the beeper still operates during parameter menu scanning and to indicate error conditions.

  • Page 109: Beeper Tone

    USER PREFERENCES & MISCELLANEOUS SCANNER OPTIONS 5 - 7 Beeper Tone Parameter # 145 To select a decode beep frequency (tone), scan one of the following bar codes. (03h) Low Tone (02h) Medium Tone (01h) High Tone (00h) Medium to High Tone (2-tone) (04h)

  • Page 110: Suppress Power Up Beeps

    5 - 8 LI4278 Product Reference Guide Suppress Power Up Beeps Parameter # 721 Scan a bar code below to select whether or not to suppress linear imager scanner beeps upon power up Do Not Suppress Power Up Beeps (00h)

  • Page 111: Beeper Duration

    USER PREFERENCES & MISCELLANEOUS SCANNER OPTIONS 5 - 9 Beeper Duration Parameter # 628 To select the duration for the beeper, scan one of the following bar codes. Short (00h) Medium (01h) Long (02h) Hand-Held Trigger Mode Parameter # 138 Select one of the following trigger modes for the linear imager scanner: Standard (Level) - A trigger pull activates decode processing.

  • Page 112: Hands-free Trigger Mode

    5 - 10 LI4278 Product Reference Guide Hands-Free Trigger Mode Parameter # 630 In hands-free mode, the linear imager scanner automatically triggers when presented with a bar code. Lifting the linear imager scanner causes it to behave according to the setting of the Hand-Held Trigger Mode on page 5-9.

  • Page 113: Time Delay To Low Power Mode

    USER PREFERENCES & MISCELLANEOUS SCANNER OPTIONS 5 - 11 Time Delay to Low Power Mode Parameter # 146 This parameter sets the time it takes the linear imager scanner to enter low power mode after any scanning activity. Scan the appropriate bar code below to set the time. 100msec (65) 500 msec...

  • Page 114: Time Delay To Presentation Sleep Mode

    5 - 12 LI4278 Product Reference Guide Time Delay to Presentation Sleep Mode Parameter # 662 In Presentation Mode, this parameter sets the time the linear imager scanner remains active before entering sleep mode with no illumination. The linear imager scanner wakes when it senses motion, upon presentation of a bar code, or a trigger pull.

  • Page 115

    USER PREFERENCES & MISCELLANEOUS SCANNER OPTIONS 5 - 13 Time Delay to Presentation Sleep Mode (continued) 15 Minutes (1Bh) 30 Minutes (1Dh) 45 Minutes (1Eh) 1 Hour (21h) 3 Hours (23h) 6 Hours (26h) 9 Hours (29h)

  • Page 116: Timeout To Low Power Mode From Auto Aim

    5 - 14 LI4278 Product Reference Guide Timeout to Low Power Mode from Auto Aim Parameter # 729 This parameter sets the time the linear imager scanner remains in auto aim before entering low power mode. Disabled 5 sec 15 sec...

  • Page 117: Continuous Bar Code Read, Unique Bar Code Reporting

    USER PREFERENCES & MISCELLANEOUS SCANNER OPTIONS 5 - 15 Continuous Bar Code Read Parameter # 649 Enable this to report every bar code while the trigger is pressed. Disable Continuous Bar Code Read (0h) Enable Continuous Bar Code Read (1h) Unique Bar Code Reporting Parameter # 723 Enable this to report only unique bar codes while the trigger is pressed.

  • Page 118: Decode Session Timeout, Timeout Between Decodes, Same Symbol, Timeout Between Decodes, Different Symbols

    5 - 16 LI4278 Product Reference Guide Decode Session Timeout Parameter # 136 This parameter sets the maximum time decode processing continues during a scan attempt. It is programmable in 0.1 second increments from 0.5 to 9.9 seconds. The default timeout is 9.9 seconds.

  • Page 119: Decoding Illumination

    USER PREFERENCES & MISCELLANEOUS SCANNER OPTIONS 5 - 17 Decoding Illumination Parameter # 298 Scanning Enable Decoding Illumination enables LED Illumination and usually results in superior images and reading ranges. Scanning Disable Decoding Illumination disables LED illumination. Enable Decoding Illumination (01h) Disable Decoding Illumination (00h)

  • Page 120: Miscellaneous Scanner Parameters, Transmit Code Id Character

    5 - 18 LI4278 Product Reference Guide Miscellaneous Scanner Parameters Transmit Code ID Character Parameter # 45 A Code ID character identifies the code type of a scanned bar code. This is useful when decoding more than one code type. In addition to any single character prefix already selected, the Code ID character is inserted between the prefix and the decoded symbol.

  • Page 121: Prefix/suffix Values

    USER PREFERENCES & MISCELLANEOUS SCANNER OPTIONS 5 - 19 Prefix/Suffix Values Key Category Parameter # P = 99, S1 = 98, S2 = 100 Decimal Value Parameter # P = 105, S1 = 104, S2 = 106 You can append a prefix and/or one or two suffixes to scan data for use in data editing. To set a value for a prefix or suffix, scan a four-digit number (i.e., four bar codes from CODES) that Appendix D, NUMERIC BAR...

  • Page 122: Scan Data Transmission Format

    5 - 20 LI4278 Product Reference Guide Scan Data Transmission Format Parameter # 235 To change the scan data format, scan one of the following eight bar codes corresponding to the desired format. NOTE If using this parameter do not use ADF rules to set the prefix/suffix...

  • Page 123: Fn1 Substitution Values

    USER PREFERENCES & MISCELLANEOUS SCANNER OPTIONS 5 - 21 Scan Data Transmission Format (continued) <PREFIX> <DATA> <SUFFIX 1> (05h) <PREFIX> <DATA> <SUFFIX 2> (06h) <PREFIX> <DATA> <SUFFIX 1> <SUFFIX 2> (07h) FN1 Substitution Values Key Category Parameter # 103 Decimal Value Parameter # 109 The Wedge and USB HID Keyboard hosts support a FN1 Substitution feature.

  • Page 124: Transmit "no Read" Message

    5 - 22 LI4278 Product Reference Guide Transmit “No Read” Message Parameter # 94 Scan a bar code below to select whether or not to transmit a No Read message. Enable this to transmit the characters NR when a successful decode does not occur before trigger release or the Decode Session Timeout expires.

  • Page 125: Unsolicited Heartbeat Interval

    USER PREFERENCES & MISCELLANEOUS SCANNER OPTIONS 5 - 23 Unsolicited Heartbeat Interval Parameter # 1118 The linear imager scanner supports sending Unsolicited Heartbeat Messages to assist in diagnostics. To enable this feature and set the desired unsolicited heartbeat interval, scan one of the time interval bar codes below, or scan Set Another Interval followed by four numeric bar codes from Appendix D, NUMERIC BAR (scan sequential numbers that correspond to the desired number of seconds).

  • Page 126: Dump Scanner Parameters

    5 - 24 LI4278 Product Reference Guide Dump Scanner Parameters For debugging a scanner problem, scan the programming bar code below to output all the scanner's asset tracking information, and parameter settings. The information is output to a text document in a human readable format.

  • Page 127

    CHAPTER 6 KEYBOARD WEDGE INTERFACE Introduction This chapter provides instructions for programming the cradle for keyboard wedge host interface, used to connect the cradle between the keyboard and host computer. The linear imager scanner translates the bar code data into keystrokes, and transmits the information to the host computer via the cradle interface. The host computer accepts the keystrokes as if they originated from the keyboard.

  • Page 128: Connecting A Keyboard Wedge Interface

    6 - 2 LI4278 Product Reference Guide Connecting a Keyboard Wedge Interface NOTE See for information about linear imager scanner/cradle pairing Chapter 4, RADIO COMMUNICATIONS and wireless communication. The linear imager scanner must be connected to the cradle for the host parameter setting to take effect. When the linear imager scanner is not connected to a cradle, and a host parameter bar code is scanned, a long low/long high beep sequence sounds.

  • Page 129: Keyboard Wedge Parameter Defaults

    KEYBOARD WEDGE INTERFACE 6 - 3 Keyboard Wedge Parameter Defaults lists the defaults for Keyboard Wedge host parameters. To change any option, scan the appropriate Table 6-1 bar code(s) in the Keyboard Wedge Host Parameters section beginning on page 6-4. NOTE See for all user preferences, hosts, symbologies, and Appendix A, STANDARD DEFAULT PARAMETERS...

  • Page 130: Keyboard Wedge Host Parameters

    6 - 4 LI4278 Product Reference Guide Keyboard Wedge Host Parameters Keyboard Wedge Host Types Select the Keyboard Wedge host by scanning one of the bar codes below. IBM PC/AT & IBM PC Compatibles IBM AT Notebook...

  • Page 131: Keyboard Wedge Country Types (country Codes)

    KEYBOARD WEDGE INTERFACE 6 - 5 Keyboard Wedge Country Types (Country Codes) Scan the bar code corresponding to the keyboard type. If the keyboard type is not listed, see Alternate Numeric Keypad Emulation on page 6-8. North American German Windows French Windows French Canadian Windows 95/98 French Canadian Windows XP/2000...

  • Page 132

    6 - 6 LI4278 Product Reference Guide Keyboard Wedge Country Types (Country Codes) (continued) Italian Windows Swedish Windows UK English Windows Japanese Windows Portuguese-Brazilian Windows...

  • Page 133: Ignore Unknown Characters, Keystroke Delay

    KEYBOARD WEDGE INTERFACE 6 - 7 Ignore Unknown Characters Unknown characters are characters the host does not recognize. When Send Bar Codes With Unknown Characters is selected, all bar code data is sent except for unknown characters, and no error beeps sound on the linear imager scanner.

  • Page 134: Intra-keystroke Delay, Alternate Numeric Keypad Emulation

    6 - 8 LI4278 Product Reference Guide Intra-Keystroke Delay When enabled, an additional delay is inserted between each emulated key depression and release. This sets the Keystroke Delay parameter to a minimum of 5 msec as well. Enable Intra-Keystroke Delay...

  • Page 135: Caps Lock On, Caps Lock Override

    KEYBOARD WEDGE INTERFACE 6 - 9 Caps Lock On When enabled, the linear imager scanner emulates keystrokes as if the Caps Lock key is always pressed. Note that if both Caps Lock On and Caps Lock Override are enabled, Caps Lock Override takes precedence Enable Caps Lock On Disable Caps Lock On...

  • Page 136: Convert Wedge Data

    6 - 10 LI4278 Product Reference Guide Convert Wedge Data When enabled, the linear imager scanner converts all bar code data to the selected case. Convert to Upper Case Convert to Lower Case No Convert Function Key Mapping ASCII values under 32 are normally sent as control key sequences (see 6-13).

  • Page 137: Fn1 Substitution

    KEYBOARD WEDGE INTERFACE 6 - 11 FN1 Substitution When enabled, the linear imager scanner replaces FN1 characters in an EAN128 bar code with a keystroke chosen by the user (see FN1 Substitution Values on page 5-21). Enable FN1 Substitution Disable FN1 Substitution Send Make and Break When enabled, the scan codes for releasing a key are not sent.

  • Page 138: Keyboard Map

    6 - 12 LI4278 Product Reference Guide Keyboard Map Refer to the following keyboard map for prefix/suffix keystroke parameters. To program the prefix/suffix values, see the bar codes on page 5-19. 7006 7014 5001 5002 5003 5004 5005 5006 5007...

  • Page 139: Ascii Character Set For Keyboard Wedge

    KEYBOARD WEDGE INTERFACE 6 - 13 ASCII Character Set for Keyboard Wedge NOTE Code 39 Full ASCII interprets the bar code special character ($ + % /) preceding a Code 39 character and assigns an ASCII character value to the pair. For example, when Code 39 Full ASCII is enabled and a +B is scanned, it is interpreted as b, %J as ?, and %V as @.

  • Page 140

    6 - 14 LI4278 Product Reference Guide Keyboard Wedge ASCII Character Set (Continued) Table 6-2 Full ASCII ASCII Value Keystroke Code 39 Encode Character 1023 CTRL W 1024 CTRL X 1025 CTRL Y 1026 CTRL Z 1027 CTRL [ /ESC...

  • Page 141

    KEYBOARD WEDGE INTERFACE 6 - 15 Keyboard Wedge ASCII Character Set (Continued) Table 6-2 Full ASCII ASCII Value Keystroke Code 39 Encode Character 1052 1053 1054 1055 1056 1057 1058 1059 1060 < 1061 1062 > 1063 1064 1065 1066 1067 1068 1069...

  • Page 142

    6 - 16 LI4278 Product Reference Guide Keyboard Wedge ASCII Character Set (Continued) Table 6-2 Full ASCII ASCII Value Keystroke Code 39 Encode Character 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 ‘...

  • Page 143

    KEYBOARD WEDGE INTERFACE 6 - 17 Keyboard Wedge ASCII Character Set (Continued) Table 6-2 Full ASCII ASCII Value Keystroke Code 39 Encode Character 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 The keystroke in bold is sent only if the “Function Key Mapping”...

  • Page 144

    6 - 18 LI4278 Product Reference Guide Keyboard Wedge ALT Key Character Set (Continued) Table 6-3 ALT Keys Keystroke 2075 ALT K 2076 ALT L 2077 ALT M 2078 ALT N 2079 ALT O 2080 ALT P 2081 ALT Q...

  • Page 145

    KEYBOARD WEDGE INTERFACE 6 - 19 Keyboard Wedge GIU Key Character Set (Continued) Table 6-4 GUI Keys Keystrokes 3067 GUI C 3068 GUI D 3069 GUI E 3070 GUI F 3071 GUI G 3072 GUI H 3073 GUI I 3074 GUI J 3075 GUI K...

  • Page 146

    6 - 20 LI4278 Product Reference Guide Keyboard Wedge F Key Character Set (Continued) Table 6-5 F Keys Keystroke 5005 5006 5007 5008 5009 5010 5011 5012 5013 5014 5015 5016 5017 5018 5019 5020 5021 5022 5023 5024 Keyboard Wedge Numeric Keypad Character Set...

  • Page 147

    KEYBOARD WEDGE INTERFACE 6 - 21 Keyboard Wedge Numeric Keypad Character Set (Continued) Table 6-6 Numeric Keypad Keystroke 6050 6051 6052 6053 6054 6055 6056 6057 6058 Enter 6059 Num Lock...

  • Page 148

    6 - 22 LI4278 Product Reference Guide Keyboard Wedge Extended Keypad Character Set Table 6-7 Extended Keypad Keystroke 7001 Break 7002 Delete 7003 Pg Up 7004 7005 Pg Dn 7006 Pause 7007 Scroll Lock 7008 Backspace 7009 7010 Print Screen...

  • Page 149: Chapter 7: Rs-232 Interface Introduction

    NOTE This linear imager scanner uses TTL RS-232 signal levels, which interface with most system architectures. For system architectures requiring RS-232C signal levels, Motorola offers different cables providing the TTL to RS-232C conversion. Contact Motorola Solutions Support for more information. Throughout the programming bar code menus, default values are indicated with asterisks (...

  • Page 150: Connecting An Rs-232 Interface

    7 - 2 LI4278 Product Reference Guide Connecting an RS-232 Interface NOTE See for information about linear imager scanner/cradle pairing Chapter 4, RADIO COMMUNICATIONS and wireless communication. The linear imager scanner must be connected to the cradle for the host parameter setting to take effect.

  • Page 151: Rs-232 Parameter Defaults

    RS-232 INTERFACE 7 - 3 RS-232 Parameter Defaults lists the defaults for RS-232 host parameters. If any option needs to be changed, scan the Table 7-1 appropriate bar code(s) provided in the Parameter Descriptions section beginning on page 7-4. NOTE See for all user preferences, hosts, symbologies, and Appendix A, STANDARD DEFAULT PARAMETERS miscellaneous default parameters.

  • Page 152: Rs-232 Host Parameters

    7 - 4 LI4278 Product Reference Guide RS-232 Host Parameters Various RS-232 hosts are set up with their own parameter default settings (Table 7-2). Selecting the ICL, Fujitsu, Wincor-Nixdorf Mode A, Wincor-Nixdorf Mode B, Olivetti, Omron, or terminal sets the defaults listed below.

  • Page 153

    RS-232 INTERFACE 7 - 5 RS-232 Host Parameters (continued) Selecting the ICL, Fujitsu, Wincor-Nixdorf Mode A, Wincor-Nixdorf Mode B, OPOS terminal enables the transmission of code ID characters listed in below. These code ID characters are not programmable Table 7-3 and are separate from the Transmit Code ID feature.

  • Page 154: Rs-232 Host Types

    7 - 6 LI4278 Product Reference Guide RS-232 Host Types To select an RS-232 host interface, scan one of the following bar codes. Standard RS-232 ICL RS-232 Wincor-Nixdorf RS-232 Mode A Wincor-Nixdorf RS-232 Mode B Olivetti ORS4500...

  • Page 155

    RS-232 INTERFACE 7 - 7 RS-232 Host Types (continued) Omron OPOS/JPOS Fujitsu RS-232 CUTE NOTE The CUTE host disables all parameter scanning, including set defaults. If the CUTE parameter is inadvertently selected, scan 5-5, then change the *Enable Parameter Bar Code Scanning (01h) on page host selection.

  • Page 156: Baud Rate

    7 - 8 LI4278 Product Reference Guide Baud Rate Baud rate is the number of bits of data transmitted per second. Set the linear imager scanner's baud rate to match the baud rate setting of the host device. Otherwise, data may not reach the host device or may reach it in distorted form.

  • Page 157: Parity, Stop Bit Select

    RS-232 INTERFACE 7 - 9 Parity A parity check bit is the most significant bit of each ASCII coded character. Select the parity type according to host device requirements. Select Odd parity and the parity bit value is set to 0 or 1, based on data, to ensure that an odd number of •...

  • Page 158: Data Bits (ascii Format), Data Bits (ascii Format), Check Receive Errors

    7 - 10 LI4278 Product Reference Guide Data Bits (ASCII Format) This parameter allows the linear imager scanner to interface with devices requiring a 7-bit or 8-bit ASCII protocol. 7-Bit 8-Bit Check Receive Errors Select whether or not the parity, framing, and overrun of received characters are checked. The parity value of received characters is verified against the parity parameter selected above.

  • Page 159: Hardware Handshaking

    RS-232 INTERFACE 7 - 11 Hardware Handshaking The data interface consists of an RS-232 port designed to operate either with or without the hardware handshaking lines, Request to Send (RTS), and Clear to Send (CTS). If Standard RTS/CTS handshaking is not selected, scan data is transmitted as it becomes available. If Standard RTS/CTS handshaking is selected, scan data is transmitted according to the following sequence: The linear imager scanner reads the CTS line for activity.

  • Page 160

    7 - 12 LI4278 Product Reference Guide Hardware Handshaking (continued) None: Scan the bar code below if no Hardware Handshaking is desired. • Standard RTS/CTS: Scan the bar code below to select Standard RTS/CTS Hardware Handshaking. • RTS/CTS Option 1: When RTS/CTS Option 1 is selected, the linear imager scanner asserts RTS before •...

  • Page 161: Software Handshaking

    RS-232 INTERFACE 7 - 13 Software Handshaking This parameter offers control of the data transmission process in addition to, or instead of, that offered by hardware handshaking. There are five options. If Software Handshaking and Hardware Handshaking are both enabled, Hardware Handshaking takes precedence.

  • Page 162

    7 - 14 LI4278 Product Reference Guide Software Handshaking (continued) None ACK/NAK ACK/NAK with ENQ XON/XOFF...

  • Page 163: Host Serial Response Time-out

    RS-232 INTERFACE 7 - 15 Host Serial Response Time-out This parameter specifies how long the linear imager scanner waits for an ACK, NAK, ENQ, XON, or CTS before determining that a transmission error occurred. Minimum: 2 sec Low: 2.5 sec Medium: 5 sec High: 7.5 sec Maximum: 9.9 sec...

  • Page 164: Rts Line State, Beep On

    7 - 16 LI4278 Product Reference Guide RTS Line State This parameter sets the idle state of the Serial Host RTS line. Scan a bar code below to select Low RTS or High RTS line state. Host: Low RTS Host: High RTS Beep on <BEL>...

  • Page 165: Intercharacter Delay

    RS-232 INTERFACE 7 - 17 Intercharacter Delay This parameter specifies the intercharacter delay inserted between character transmissions. Minimum: 0 msec Low: 25 msec Medium: 50 msec High: 75 msec Maximum: 99 msec...

  • Page 166: Nixdorf Beep/led Options

    7 - 18 LI4278 Product Reference Guide Nixdorf Beep/LED Options When Nixdorf Mode B is selected, this indicates when the linear imager scanner should beep and turn on its LED after a decode. Normal Operation (Beep/LED immediately after decode) Beep/LED After Transmission...

  • Page 167: Ascii Character Set For Rs-232

    RS-232 INTERFACE 7 - 19 ASCII Character Set for RS-232 The values in can be assigned as prefixes or suffixes for ASCII character data transmission. Table 7-4 ASCII Character Set for RS-232 Table 7-4 Full ASCII ASCII Value ASCII Character Code 39 Encode Character 1000 1001...

  • Page 168

    7 - 20 LI4278 Product Reference Guide ASCII Character Set for RS-232 (Continued) Table 7-4 Full ASCII ASCII Value ASCII Character Code 39 Encode Character 1028 1029 1030 1031 1032 Space Space 1033 1034 " 1035 1036 1037 1038 &...

  • Page 169

    RS-232 INTERFACE 7 - 21 ASCII Character Set for RS-232 (Continued) Table 7-4 Full ASCII ASCII Value ASCII Character Code 39 Encode Character 1059 1060 < 1061 1062 > 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076...

  • Page 170

    7 - 22 LI4278 Product Reference Guide ASCII Character Set for RS-232 (Continued) Table 7-4 Full ASCII ASCII Value ASCII Character Code 39 Encode Character 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104...

  • Page 171

    RS-232 INTERFACE 7 - 23 ASCII Character Set for RS-232 (Continued) Table 7-4 Full ASCII ASCII Value ASCII Character Code 39 Encode Character 1121 1122 1123 1124 1125 1126 1127 Undefined 7013 ENTER...

  • Page 172

    7 - 24 LI4278 Product Reference Guide...

  • Page 173: Chapter 8: Usb Interface Introduction

    CHAPTER 8 USB INTERFACE Introduction This chapter provides instructions for programming the cradle to interface with a USB host. The linear imager scanner cradle connects directly to a USB host, or a powered USB hub. The USB host can power the cradle and recharge the linear imager scanner battery, but this charging method has limitations.

  • Page 174: Connecting A Usb Interface

    8 - 2 LI4278 Product Reference Guide Connecting a USB Interface NOTE See for information about linear imager scanner/cradle pairing Chapter 4, RADIO COMMUNICATIONS and wireless communication The linear imager scanner must be connected to the cradle for the host parameter setting to take effect.

  • Page 175

    USB INTERFACE 8 - 3 To connect the USB interface: Attach the modular connector of the USB interface cable to the host port on the bottom of the linear imager scanner cradle (see Connecting the CR0078-S/CR0008-S Series Cradle on page 1-8 Connecting the CR0078-P Series Cradle on page 1-9).

  • Page 176: Usb Parameter Defaults

    8 - 4 LI4278 Product Reference Guide USB Parameter Defaults lists the defaults for USB host parameters. If any option needs to be changed, scan the appropriate Table 8-1 bar code(s) provided in the Parameter Descriptions section beginning on page 8-5.

  • Page 177: Usb Host Parameters, Usb Device Type

    USB INTERFACE 8 - 5 USB Host Parameters USB Device Type Select the desired USB device type. NOTE 1. When changing USB Device Types, the cradle automatically restarts. The linear imager scanner issues a disconnect-reconnect beep sequence. 2. The USB CDC host selection is only supported when the scanner is inserted into the CR0078-P (presentation) cradle.

  • Page 178: Symbol Native Api (snapi) Status Handshaking

    8 - 6 LI4278 Product Reference Guide USB Device Type (continued) USB CDC Host Symbol Native API (SNAPI) without Imaging Interface Symbol Native API (SNAPI) Status Handshaking After selecting a SNAPI interface as the USB device type, select whether to enable or disable status handshaking.

  • Page 179: Usb Country Keyboard Types (country Codes), Usb Country Keyboard Types (country Codes)

    USB INTERFACE 8 - 7 USB Country Keyboard Types (Country Codes) Scan the bar code corresponding to the keyboard type. This setting applies only to the USB HID Keyboard Emulation device. NOTE When changing USB country keyboard types the linear imager scanner automatically resets. The linear imager scanner issues the standard startup beep sequences.

  • Page 180

    8 - 8 LI4278 Product Reference Guide USB Country Keyboard Types (Country Codes) (continued) Spanish Windows Italian Windows Swedish Windows UK English Windows Japanese Windows (ASCII) Portuguese-Brazilian Windows...

  • Page 181: Usb Keystroke Delay, Usb Caps Lock Override

    USB INTERFACE 8 - 9 USB Keystroke Delay This parameter sets the delay, in milliseconds, between emulated keystrokes. Scan a bar code below to increase the delay when hosts require a slower transmission of data. No Delay Medium Delay (20 msec) Long Delay (40 msec) USB CAPS Lock Override This option applies only to the HID Keyboard Emulation device.

  • Page 182: Usb Ignore Unknown Characters, Usb Convert Unknown To Code

    8 - 10 LI4278 Product Reference Guide USB Ignore Unknown Characters This option applies only to the HID Keyboard Emulation device and IBM device. Unknown characters are characters the host does not recognize. When Send Bar Codes With Unknown Characters is selected, all bar code data is sent except for unknown characters, and no error beeps sound.

  • Page 183: Emulate Keypad, Emulate Keypad With Leading Zero

    USB INTERFACE 8 - 11 Emulate Keypad When enabled, all characters are sent as ASCII sequences over the numeric keypad. For example ASCII A would be sent as “ALT make” 0 6 5 “ALT Break.” Disable Keypad Emulation Enable Keypad Emulation Emulate Keypad with Leading Zero Enable this to send character sequences sent over the numeric keypad as ISO characters which have a leading zero.

  • Page 184: Quick Keypad Emulation

    8 - 12 LI4278 Product Reference Guide Quick Keypad Emulation This option applies only to the HID Keyboard Emulation Device and if Emulate Keypad is enabled. This parameter enables a quicker method of keypad emulation where ASCII sequences are only sent for ASCII characters not found on the keyboard.

  • Page 185: Function Key Mapping

    USB INTERFACE 8 - 13 Function Key Mapping ASCII values under 32 are normally sent as a control-key sequences (see 8-18). When this Table 8-2 on page parameter is enabled, the keys in bold are sent in place of the standard key mapping. Table entries that do not have a bold entry remain the same whether or not this parameter is enabled.

  • Page 186: Convert Case, Usb Static Cdc

    8 - 14 LI4278 Product Reference Guide Convert Case When enabled, the linear imager scanner converts all bar code data to the selected case. No Case Conversion Convert All to Upper Case Convert All to Lower Case USB Static CDC...

  • Page 187: Optional Usb Parameters

    USB INTERFACE 8 - 15 Optional USB Parameters If you configure the linear imager scanner and find the settings were not saved, or changed, when the system is restarted scan the bar codes that follow to override USB interface defaults. Scan a bar code below after setting defaults and before configuring the linear imager scanner.

  • Page 188: Usb Polling Interval

    8 - 16 LI4278 Product Reference Guide USB Polling Interval Scan a bar code below to set the polling interval. The polling interval determines the rate at which data can be sent between the scanner and host computer. A lower number indicates a faster data rate NOTE When changing USB Device Types, the cradle automatically restarts.

  • Page 189

    USB INTERFACE 8 - 17 USB Polling Interval (continued) 5 msec 6 msec 7 msec 8 msec 9 msec...

  • Page 190: Ascii Character Set For Usb

    8 - 18 LI4278 Product Reference Guide ASCII Character Set for USB ASCII Character Set for USB Table 8-2 Full ASCII ASCII Value Code 39 Encode Keystroke Character 1000 CTRL 2 1001 CTRL A 1002 CTRL B 1003 CTRL C...

  • Page 191

    USB INTERFACE 8 - 19 ASCII Character Set for USB (Continued) Table 8-2 Full ASCII ASCII Value Code 39 Encode Keystroke Character 1025 CTRL Y 1026 CTRL Z 1027 CTRL [/ESC 1028 CTRL \ 1029 CTRL ] 1030 CTRL 6 1031 CTRL - 1032...

  • Page 192

    8 - 20 LI4278 Product Reference Guide ASCII Character Set for USB (Continued) Table 8-2 Full ASCII ASCII Value Code 39 Encode Keystroke Character 1053 1054 1055 1056 1057 1058 1059 1060 < 1061 1062 > 1063 1064 1065 1066...

  • Page 193

    USB INTERFACE 8 - 21 ASCII Character Set for USB (Continued) Table 8-2 Full ASCII ASCII Value Code 39 Encode Keystroke Character 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102...

  • Page 194

    8 - 22 LI4278 Product Reference Guide ASCII Character Set for USB (Continued) Table 8-2 Full ASCII ASCII Value Code 39 Encode Keystroke Character 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 The keystroke in bold is sent only if the “Function Key Mapping”...

  • Page 195

    USB INTERFACE 8 - 23 USB ALT Key Character Set Table 8-3 ALT Keys Keystroke 2064 ALT 2 2065 ALT A 2066 ALT B 2067 ALT C 2068 ALT D 2069 ALT E 2070 ALT F 2071 ALT G 2072 ALT H 2073 ALT I...

  • Page 196

    8 - 24 LI4278 Product Reference Guide USB GUI Key Character Set Table 8-4 GUI Key Keystroke 3000 Right Control Key 3048 GUI 0 3049 GUI 1 3050 GUI 2 3051 GUI 3 3052 GUI 4 3053 GUI 5 3054...

  • Page 197

    USB INTERFACE 8 - 25 USB GUI Key Character Set (Continued) Table 8-4 GUI Key Keystroke 3082 GUI R 3083 GUI S 3084 GUI T 3085 GUI U 3086 GUI V 3087 GUI W 3088 GUI X 3089 GUI Y 3090 GUI Z Note:...

  • Page 198

    8 - 26 LI4278 Product Reference Guide USB F Key Character Set (Continued) Table 8-5 F Keys Keystroke 5018 5019 5020 5021 5022 5023 5024 USB Numeric Keypad Character Set Table 8-6 Numeric Keypad Keystroke 6042 6043 6044 undefined 6045...

  • Page 199

    USB INTERFACE 8 - 27 USB Extended Keypad Character Set Table 8-7 Extended Keypad Keystroke 7001 Break 7002 Delete 7003 PgUp 7004 7005 Pg Dn 7006 Pause 7007 Scroll Lock 7008 Backspace 7009 7010 Print Screen 7011 Insert 7012 Home 7013 Enter 7014...

  • Page 200

    8 - 28 LI4278 Product Reference Guide...

  • Page 201: Chapter 9: Ibm Interface Introduction

    CHAPTER 9 IBM INTERFACE Introduction This chapter provides instructions for programming the cradle to interface with an IBM 468X/469X host computer. Throughout the programming bar code menus, default values are indicated with asterisks ( Indicates Default Feature/Option Disable Convert Unknown to Code 39...

  • Page 202: Connecting To An Ibm 468x/469x Host

    9 - 2 LI4278 Product Reference Guide Connecting to an IBM 468X/469X Host NOTE See for information about linear imager scanner/cradle pairing Chapter 4, RADIO COMMUNICATIONS and wireless communication The linear imager scanner must be connected to the cradle for the host parameter setting to take effect.

  • Page 203: Ibm Parameter Defaults

    IBM INTERFACE 9 - 3 IBM Parameter Defaults lists the defaults for IBM host parameters. To change any option, scan the appropriate bar code(s) Table 9-1 provided in the Parameter Descriptions section beginning on page 9-4. NOTE See for all user preferences, hosts, symbologies, and Appendix A, STANDARD DEFAULT PARAMETERS miscellaneous default parameters.

  • Page 204: Ibm 468x/469x Host Parameters

    9 - 4 LI4278 Product Reference Guide IBM 468X/469X Host Parameters Port Address This parameter sets the IBM 468X/469X port used. NOTE Scanning one of these bar codes enables the RS-485 interface on the linear imager scanner. None Selected Hand-held Scanner Emulation (Port 9B)

  • Page 205: Convert Unknown To Code 39

    IBM INTERFACE 9 - 5 Convert Unknown to Code 39 Scan a bar code below to enable or disable the conversion of unknown bar code type data to Code 39. Enable Convert Unknown to Code 39 Disable Convert Unknown to Code 39 Optional IBM Parameters If you configure the linear imager scanner and find the settings were not saved, or changed, when the system is restarted scan the bar codes that follow to override IBM interface defaults.

  • Page 206: Ignore Bar Code Configuration

    9 - 6 LI4278 Product Reference Guide Ignore Bar Code Configuration The host has the ability to enable/disable code types. When this parameter is enabled, the request is not sent to the attached linear imager scanner. All directives are still acknowledged to the IBM RS485 host as if it were processed.

  • Page 207: Chapter 10: 123scan2 Introduction

    CHAPTER 10 123SCAN2 Introduction 123Scan² is an easy-to-use, PC-based software tool that enables rapid and easy customized setup of Motorola scanners. 123Scan² uses a wizard tool to guide users through a streamlined set up process. Settings are saved in a configuration file that can be distributed via e-mail, electronically downloaded via a USB cable, or used to generate a sheet of scannable programming bar codes.

  • Page 208: Scanner Sdk, Other Software Tools, And Videos

    10 - 2 LI4278 Product Reference Guide 123Scan Requirements Host computer with Windows XP SP2 or Windows 7 • Scanner • Cradle (cordless scanning only) • USB cable. • For more information about 123Scan², go to: http://www.motorolasolutions.com/123Scan Scanner SDK, Other Software Tools, and Videos Tackle all your scanner programming needs with our diversified set of software tools.

  • Page 209: Chapter 11: Symbologies Introduction

    CHAPTER 11 SYMBOLOGIES Introduction This chapter describes symbology features and provides programming bar codes for selecting these features. Before programming, follow the instructions in Chapter 1, GETTING STARTED. To set feature values, scan a single bar code or a short bar code sequence. The settings are stored in non-volatile memory and are preserved even when the linear imager scanner powers down.

  • Page 210: Errors While Scanning

    11 - 2 LI4278 Product Reference Guide Errors While Scanning Unless otherwise specified, to correct an error during a scanning sequence, just re-scan the correct parameter. Symbology Parameter Defaults lists the defaults for all symbologies parameters. To change the default values, scan the appropriate Table 11-1 bar codes in this guide.

  • Page 211: Table Of Contents

    SYMBOLOGIES 11 - 3 Parameter Defaults (Continued) Table 11-1 Parameter Page Parameter Default Number Number Convert UPC-E1 to A Disable 11-19 EAN-8/JAN-8 Extend Disable 11-20 Bookland ISBN Format ISBN-10 11-20 UCC Coupon Extended Code Disable 11-21 Coupon Report New Coupon 11-21 Format ISSN EAN...

  • Page 212

    11 - 4 LI4278 Product Reference Guide Parameter Defaults (Continued) Table 11-1 Parameter Page Parameter Default Number Number Code 11 Check Digit Verification Disable 11-39 Transmit Code 11 Check Digit(s) Disable 11-40 Interleaved 2 of 5 (ITF) Interleaved 2 of 5 (ITF)

  • Page 213: Table Of Contents

    SYMBOLOGIES 11 - 5 Parameter Defaults (Continued) Table 11-1 Parameter Page Parameter Default Number Number Korean 3 of 5 Korean 3 of 5 Disable 11-59 Inverse 1D Inverse 1D Regular 11-60 GS1 DataBar GS1 DataBar-14 Enable 11-61 GS1 DataBar Limited Disable 11-61 GS1 DataBar Expanded...

  • Page 214: Upc/ean

    11 - 6 LI4278 Product Reference Guide UPC/EAN Enable/Disable UPC-A Parameter # 1 To enable or disable UPC-A, scan the appropriate bar code below Enable UPC-A Disable UPC-A Enable/Disable UPC-E Parameter # 2 To enable or disable UPC-E, scan the appropriate bar code below...

  • Page 215: Enable/disable Upc-e1

    SYMBOLOGIES 11 - 7 Enable/Disable UPC-E1 Parameter # 12 UPC-E1 is disabled by default. To enable or disable UPC-E1, scan the appropriate bar code below. NOTE UPC-E1 is not a UCC (Uniform Code Council) approved symbology. Enable UPC-E1 (01h) Disable UPC-E1 (00h) Enable/Disable EAN-8/JAN-8 Parameter # 4...

  • Page 216: Enable/disable Ean-13/jan-13

    11 - 8 LI4278 Product Reference Guide Enable/Disable EAN-13/JAN-13 Parameter # 3 To enable or disable EAN-13/JAN-13, scan the appropriate bar code below Enable EAN-13/JAN-13 (01h) Disable EAN-13/JAN-13 (00h) Enable/Disable Bookland EAN Parameter # 83 To enable or disable Bookland EAN, scan the appropriate bar code below.

  • Page 217: Decode Upc/ean/jan Supplementals

    SYMBOLOGIES 11 - 9 Decode UPC/EAN/JAN Supplementals Parameter # 16 Supplementals are bar codes appended according to specific format conventions (e.g., UPC A+2, UPC E+2, EAN 13+2). The following options are available: If you select Ignore UPC/EAN with Supplementals, and the linear imager scanner is presented •...

  • Page 218

    11 - 10 LI4278 Product Reference Guide Decode UPC/EAN/JAN Supplementals (continued) Decode UPC/EAN/JAN Only With Supplementals (01h) Ignore Supplementals (00h) Autodiscriminate UPC/EAN/JAN Supplementals (02h) Enable 378/379 Supplemental Mode (04h) Enable 978/979 Supplemental Mode (05h) Enable 977 Supplemental Mode (07h)

  • Page 219

    SYMBOLOGIES 11 - 11 Decode UPC/EAN/JAN Supplementals (continued) Enable 414/419/434/439 Supplemental Mode (06h) Enable 491 Supplemental Mode (08h) Enable Smart Supplemental Mode (03h) Supplemental User-Programmable Type 1 (09h) Supplemental User-Programmable Type 1 and 2 (0Ah) Smart Supplemental Plus User-Programmable 1 (0Bh) Smart Supplemental Plus User-Programmable 1 and 2 (0Ch)

  • Page 220: User-programmable Supplementals, Upc/ean/jan Supplemental Redundancy

    11 - 12 LI4278 Product Reference Guide User-Programmable Supplementals Supplemental 1: Parameter # 579 Supplemental 2: Parameter # 580 If you selected a Supplemental User-Programmable option from Decode UPC/EAN/JAN Supplementals on 11-9, select User-Programmable Supplemental 1 to set the 3-digit prefix. Then select the 3 digits using...

  • Page 221: Upc/ean/jan Supplemental Aim Id Format

    SYMBOLOGIES 11 - 13 UPC/EAN/JAN Supplemental AIM ID Format Parameter # 672 Select an output format when reporting UPC/EAN/JAN bar codes with Supplementals with Transmit Code ID set to Character on page 5-18 AIM Code ID Character - transmit UPC/EAN with supplementals with separate AIM IDs but one transmission, i.e.: •...

  • Page 222: Transmit Upc-a Check Digit, Transmit Upc-e Check Digit

    11 - 14 LI4278 Product Reference Guide Transmit UPC-A Check Digit Parameter # 40 The check digit is the last character of the symbol used to verify the integrity of the data. Scan the appropriate bar code below to transmit the bar code data with or without the UPC-A check digit. It is always verified to guarantee the integrity of the data.

  • Page 223: Transmit Upc-e1 Check Digit

    SYMBOLOGIES 11 - 15 Transmit UPC-E1 Check Digit Parameter # 42 The check digit is the last character of the symbol used to verify the integrity of the data. Scan the appropriate bar code below to transmit the bar code data with or without the UPC-E1 check digit. It is always verified to guarantee the integrity of the data.

  • Page 224: Upc-a Preamble

    11 - 16 LI4278 Product Reference Guide UPC-A Preamble Parameter # 34 Preamble characters are part of the UPC symbol, and include Country Code and System Character. There are three options for transmitting a UPC-A preamble to the host device: transmit System Character only, transmit System Character and Country Code (“0”...

  • Page 225: Upc-e Preamble

    SYMBOLOGIES 11 - 17 UPC-E Preamble Parameter # 35 Preamble characters are part of the UPC symbol, and include Country Code and System Character. There are three options for transmitting a UPC-E preamble to the host device: transmit System Character only, transmit System Character and Country Code (“0”...

  • Page 226: Upc-e1 Preamble

    11 - 18 LI4278 Product Reference Guide UPC-E1 Preamble Parameter # 36 Preamble characters are part of the UPC symbol, and include Country Code and System Character. There are three options for transmitting a UPC-E1 preamble to the host device: transmit System Character only, transmit System Character and Country Code (“0”...

  • Page 227: Convert Upc-e To Upc-a

    SYMBOLOGIES 11 - 19 Convert UPC-E to UPC-A Parameter # 37 Enable this to convert UPC-E (zero suppressed) decoded data to UPC-A format before transmission. After conversion, the data follows UPC-A format and is affected by UPC-A programming selections (e.g., Preamble, Check Digit).

  • Page 228: Ean-8/jan-8 Extend, Bookland Isbn Format

    11 - 20 LI4278 Product Reference Guide EAN-8/JAN-8 Extend Parameter # 39 Enable this parameter to add five leading zeros to decoded EAN-8 symbols to make them compatible in format to EAN-13 symbols. Disable this to transmit EAN-8 symbols as is.

  • Page 229: Ucc Coupon Extended Code, Coupon Report

    SYMBOLOGIES 11 - 21 UCC Coupon Extended Code Parameter # 85 Enable this parameter to decode UPC-A bar codes starting with digit ‘5’, EAN-13 bar codes starting with digit ‘99’, and UPC-A/GS1-128 Coupon Codes. UPCA, EAN-13, and GS1-128 must be enabled to scan all types of Coupon Codes.

  • Page 230: Issn Ean

    11 - 22 LI4278 Product Reference Guide ISSN EAN Parameter # 617 To enable or disable ISSN EAN, scan the appropriate bar code below. Enable ISSN EAN (01h) Disable ISSN EAN (00h)

  • Page 231: Code 128

    SYMBOLOGIES 11 - 23 Code 128 Enable/Disable Code 128 Parameter # 8 To enable or disable Code 128, scan the appropriate bar code below. Enable Code 128 (01h) Disable Code 128 (00h) Set Lengths for Code 128 Parameter # 209, 210 The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the code contains.

  • Page 232

    11 - 24 LI4278 Product Reference Guide Set Lengths for Code 128 (continued) Code 128 - One Discrete Length Code 128 - Two Discrete Lengths Code 128 - Length Within Range Code 128 - Any Length...

  • Page 233: Enable/disable Gs1-128 (formerly Ucc/ean-128)

    SYMBOLOGIES 11 - 25 Enable/Disable GS1-128 (formerly UCC/EAN-128) Parameter # 14 To enable or disable GS1-128, scan the appropriate bar code below. Enable GS1-128 (01h) Disable GS1-128 (00h) Enable/Disable ISBT 128 Parameter # 84 ISBT 128 is a variant of Code 128 used in the blood bank industry. Scan a bar code below to enable or disable ISBT 128.

  • Page 234: Isbt Concatenation

    11 - 26 LI4278 Product Reference Guide ISBT Concatenation Parameter # 577 Select an option for concatenating pairs of ISBT code types: If you select Disable ISBT Concatenation, the linear imager scanner does not concatenate pairs • of ISBT codes it encounters.

  • Page 235: Check Isbt Table, Isbt Concatenation Redundancy

    SYMBOLOGIES 11 - 27 Check ISBT Table Parameter # 578 The ISBT specification includes a table that lists several types of ISBT bar codes that are commonly used in pairs. If you set ISBT Concatenation to Enable, enable Check ISBT Table to concatenate only those pairs found in this table.

  • Page 236: Enable/disable Code 39

    11 - 28 LI4278 Product Reference Guide Code 39 Enable/Disable Code 39 Parameter # 0 To enable or disable Code 39, scan the appropriate bar code below. Enable Code 39 (01h) Disable Code 39 (00h) Enable/Disable Trioptic Code 39 Parameter # 13 Trioptic Code 39 is a variant of Code 39 used in the marking of computer tape cartridges.

  • Page 237: Convert Code 39 To Code 32

    SYMBOLOGIES 11 - 29 Convert Code 39 to Code 32 Parameter # 86 Code 32 is a variant of Code 39 used by the Italian pharmaceutical industry. Scan the appropriate bar code below to enable or disable converting Code 39 to Code 32. NOTE Code 39 must be enabled for this parameter to function.

  • Page 238: Set Lengths For Code 39

    11 - 30 LI4278 Product Reference Guide Set Lengths for Code 39 Parameter # 18, 19 The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the code contains. Set lengths for Code 39 to any length, one or two discrete lengths, or lengths within a specific range.

  • Page 239: Code 39 Check Digit Verification, Transmit Code 39 Check Digit

    SYMBOLOGIES 11 - 31 Code 39 Check Digit Verification Parameter # 48 Enable this feature to check the integrity of all Code 39 symbols to verify that the data complies with specified check digit algorithm. Only Code 39 symbols which include a modulo 43 check digit are decoded. Enable this feature if the Code 39 symbols contain a Modulo 43 check digit.

  • Page 240: Code 39 Full Ascii Conversion

    11 - 32 LI4278 Product Reference Guide Code 39 Full ASCII Conversion Parameter # 17 Code 39 Full ASCII is a variant of Code 39 which pairs characters to encode the full ASCII character set. To enable or disable Code 39 Full ASCII, scan the appropriate bar code below.

  • Page 241: Buffer Data

    SYMBOLOGIES 11 - 33 Code 39 Buffering - Scan & Store (continued) This feature affects Code 39 only. If selecting Buffer Code 39, we recommend configuring the linear imager scanner to decode Code 39 symbology only. Buffer Code 39 (Enable) (01h) Do Not Buffer Code 39 (Disable) (00h)

  • Page 242: Transmit Buffer

    11 - 34 LI4278 Product Reference Guide Transmit Buffer There are two methods to transmit the Code 39 buffer. Scan the Transmit Buffer bar code below, which includes only a start character, a plus (+), and a stop character. The linear imager scanner transmits and clears the buffer.

  • Page 243: Enable/disable Code 93

    SYMBOLOGIES 11 - 35 Code 93 Enable/Disable Code 93 Parameter # 9 To enable or disable Code 93, scan the appropriate bar code below. Enable Code 93 (01h) Disable Code 93 (00h) Set Lengths for Code 93 Parameter # 26, 27 The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the code contains.

  • Page 244

    11 - 36 LI4278 Product Reference Guide Set Lengths for Code 93 (continued) Code 93 - One Discrete Length Code 93 - Two Discrete Lengths Code 93 - Length Within Range Code 93 - Any Length...

  • Page 245: Set Lengths For Code 11

    SYMBOLOGIES 11 - 37 Code 11 Code 11 Parameter # 10 To enable or disable Code 11, scan the appropriate bar code below. Enable Code 11 (01h) Disable Code 11 (00h) Set Lengths for Code 11 Parameter # 28, 29 The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the code contains.

  • Page 246

    11 - 38 LI4278 Product Reference Guide Set Lengths for Code 11 (continued) Code 11 - One Discrete Length Code 11 - Two Discrete Lengths Code 11 - Length Within Range Code 11 - Any Length...

  • Page 247: Code 11 Check Digit Verification

    SYMBOLOGIES 11 - 39 Code 11 Check Digit Verification Parameter # 52 This feature allows the linear imager scanner to check the integrity of all Code 11 symbols to verify that the data complies with the specified check digit algorithm. This selects the check digit mechanism for the decoded Code 11 bar code.

  • Page 248: Transmit Code 11 Check Digits

    11 - 40 LI4278 Product Reference Guide Transmit Code 11 Check Digits Parameter # 47 This feature selects whether or not to transmit the Code 11 check digit(s). Transmit Code 11 Check Digit(s) (Enable) (01h) Do Not Transmit Code 11 Check Digit(s) (Disable) (00h) NOTE Code 11 Check Digit Verification must be enabled for this parameter to function.

  • Page 249: Interleaved 2 Of 5 (itf)

    SYMBOLOGIES 11 - 41 Interleaved 2 of 5 (ITF) Enable/Disable Interleaved 2 of 5 Parameter # 6 To enable or disable Interleaved 2 of 5, scan the appropriate bar code below, and select an Interleaved 2 of 5 length from the following pages. Enable Interleaved 2 of 5 (01h) Disable Interleaved 2 of 5...

  • Page 250

    11 - 42 LI4278 Product Reference Guide Set Lengths for Interleaved 2 of 5 (continued) I 2 of 5 - One Discrete Length I 2 of 5 - Two Discrete Lengths I 2 of 5 - Length Within Range I 2 of 5 - Any Length...

  • Page 251: I 2 Of 5 Check Digit Verification

    SYMBOLOGIES 11 - 43 I 2 of 5 Check Digit Verification Parameter # 49 Enable this feature to check the integrity of all I 2 of 5 symbols to verify the data complies with either the specified Uniform Symbology Specification (USS), or the Optical Product Code Council (OPCC) check digit algorithm.

  • Page 252

    11 - 44 LI4278 Product Reference Guide Convert I 2 of 5 to EAN-13 Parameter # 82 Enable this parameter to convert 14-character I 2 of 5 codes to EAN-13, and transmit to the host as EAN-13. To accomplish this, the I 2 of 5 code must be enabled, and the code must have a leading zero and a valid EAN-13 check digit.

  • Page 253: Discrete 2 Of 5 (dtf)

    SYMBOLOGIES 11 - 45 Discrete 2 of 5 (DTF) Enable/Disable Discrete 2 of 5 Parameter # 5 To enable or disable Discrete 2 of 5, scan the appropriate bar code below. Enable Discrete 2 of 5 (01h) Disable Discrete 2 of 5 (00h) Set Lengths for Discrete 2 of 5 Parameter # 20, 21...

  • Page 254

    11 - 46 LI4278 Product Reference Guide Set Lengths for Discrete 2 of 5 (continued) D 2 of 5 - One Discrete Length D 2 of 5 - Two Discrete Lengths D 2 of 5 - Length Within Range D 2 of 5 - Any Length...

  • Page 255: Codabar (nw - 7)

    SYMBOLOGIES 11 - 47 Codabar (NW - 7) Enable/Disable Codabar Parameter # 7 To enable or disable Codabar, scan the appropriate bar code below. Enable Codabar (01h) Disable Codabar (00h) Set Lengths for Codabar Parameter # 24, 25 The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the code contains.

  • Page 256

    11 - 48 LI4278 Product Reference Guide Set Lengths for Codabar (continued) Codabar - One Discrete Length Codabar - Two Discrete Lengths Codabar - Length Within Range Codabar - Any Length...

  • Page 257: Clsi Editing

    SYMBOLOGIES 11 - 49 CLSI Editing Parameter # 54 Enable this parameter to strip the start and stop characters and insert a space after the first, fifth, and tenth characters of a 14-character Codabar symbol. Enable this feature if the host system requires this data format. NOTE Symbol length does not include start and stop characters.

  • Page 258: Codabar Upper Or Lower Case Start/stop Characters Detection

    11 - 50 LI4278 Product Reference Guide Codabar Upper or Lower Case Start/Stop Characters Detection Parameter # 855 Select whether to detect upper case or lower case Codabar start/stop characters. Lower Case (01h) Upper Case (00h)

  • Page 259: Enable/disable Msi

    SYMBOLOGIES 11 - 51 Enable/Disable MSI Parameter # 11 To enable or disable MSI, scan the appropriate bar code below. Enable MSI (01h) Disable MSI (00h) Set Lengths for MSI Parameter # 30, 31 The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the code contains.

  • Page 260

    11 - 52 LI4278 Product Reference Guide Set Lengths for MSI (continued) NOTE Due to the construction of the MSI symbology, it is possible for a scan line covering only a portion of the code to transmit as a complete scan, yielding less data than is encoded in the bar code. To prevent this, select specific lengths (MSI - One Discrete Length, Two Discrete Lengths) for MSI applications.

  • Page 261: Msi Check Digits

    SYMBOLOGIES 11 - 53 MSI Check Digits Parameter # 50 With MSI symbols, one check digit is mandatory and always verified by the reader. The second check digit is optional. If the MSI codes include two check digits, scan the Two MSI Check Digits bar code to enable verification of the second check digit.

  • Page 262: Msi Check Digit Algorithm

    11 - 54 LI4278 Product Reference Guide MSI Check Digit Algorithm Parameter # 51 Two algorithms are possible for the verification of the second MSI check digit. Select the bar code below corresponding to the algorithm used to encode the check digit.

  • Page 263: Chinese 2 Of

    SYMBOLOGIES 11 - 55 Chinese 2 of 5 Enable/Disable Chinese 2 of 5 Parameter # 408 To enable or disable Chinese 2 of 5, scan the appropriate bar code below. Enable Chinese 2 of 5 (01h) Disable Chinese 2 of 5 (00h)

  • Page 264: Enable/disable Matrix 2 Of 5

    11 - 56 LI4278 Product Reference Guide Matrix 2 of 5 Enable/Disable Matrix 2 of 5 Parameter # 618 To enable or disable Matrix 2 of 5, scan the appropriate bar code below. Enable Matrix 2 of 5 (01h) Disable Matrix 2 of 5...

  • Page 265

    SYMBOLOGIES 11 - 57 Set Lengths for Matrix 2 of 5 (continued) Matrix 2 of 5 - One Discrete Length Matrix 2 of 5 - Two Discrete Lengths Matrix 2 of 5 - Length Within Range Matrix 2 of 5 - Any Length...

  • Page 266: Matrix 2 Of 5 Check Digit, Transmit Matrix 2 Of 5 Check Digit

    11 - 58 LI4278 Product Reference Guide Matrix 2 of 5 Check Digit Parameter # 622 The check digit is the last character of the symbol used to verify the integrity of the data. Scan the appropriate bar code below to transmit the bar code data with or without the Matrix 2 of 5 check digit.

  • Page 267: Enable/disable Korean 3 Of 5, Korean 3 Of

    SYMBOLOGIES 11 - 59 Korean 3 of 5 Enable/Disable Korean 3 of 5 Parameter # 581 To enable or disable Korean 3 of 5, scan the appropriate bar code below. NOTE The length for Korean 3 of 5 is fixed at 6. Enable Korean 3 of 5 (01h) Disable Korean 3 of 5...

  • Page 268: Inverse 1d

    11 - 60 LI4278 Product Reference Guide Inverse 1D Parameter # 586 This parameter sets the 1D inverse decoder setting. Options are: - the linear imager scanner decodes regular 1D bar codes only. • Regular Only - the linear imager scanner decodes inverse 1D bar codes only.

  • Page 269: Gs1 Databar, Gs1 Databar Limited

    SYMBOLOGIES 11 - 61 GS1 DataBar The variants of GS1 DataBar are DataBar-14, DataBar Expanded, and DataBar Limited. The limited and expanded versions have stacked variants. Scan the appropriate bar codes to enable or disable each variant of GS1 DataBar. GS1 DataBar-14 Parameter # 338 Enable GS1 DataBar-14...

  • Page 270: Gs1 Databar Expanded, Gs1 Databar Limited Security Level

    11 - 62 LI4278 Product Reference Guide GS1 DataBar Expanded Parameter # 340 Enable GS1 DataBar Expanded (01h) Disable GS1 DataBar Expanded (00h) GS1 DataBar Limited Security Level Parameter # 728 The linear imager scanner offers four levels of decode security for GS1 DataBar Limited bar codes. There is an inverse relationship between security and linear imager scanner aggressiveness.

  • Page 271

    SYMBOLOGIES 11 - 63 GS1 DataBar Limited Security Level (continued) GS1 DataBar Limited Security Level 1 (01h) GS1 DataBar Limited Security Level 2 (02h) GS1 DataBar Limited Security Level 3 (03h) GS1 DataBar Limited Security Level 4 (04h)

  • Page 272: Convert Gs1 Databar To Upc/ean

    11 - 64 LI4278 Product Reference Guide Convert GS1 DataBar to UPC/EAN Parameter # 397 This parameter only applies to GS1 DataBar-14 and GS1 DataBar Limited symbols not decoded as part of a Composite symbol. Enable this to strip the leading '010' from DataBar-14 and DataBar Limited symbols encoding a single zero as the first digit, and report the bar code as EAN-13.

  • Page 273: Redundancy Level

    SYMBOLOGIES 11 - 65 Redundancy Level Parameter # 78 The linear imager scanner offers four levels of decode redundancy. Select higher redundancy levels for decreasing levels of bar code quality. As redundancy levels increase, the linear imager scanner’s aggressiveness decreases. Select the redundancy level appropriate for the bar code quality.

  • Page 274: Redundancy Level 4

    11 - 66 LI4278 Product Reference Guide Redundancy Level 4 The following code types must be successfully read three times before being decoded: Redundancy Level 4 Codes Table 11-5 Code Type Code Length Redundancy Level 1 (01h) Redundancy Level 2...

  • Page 275: Security Level

    SYMBOLOGIES 11 - 67 Security Level Parameter # 77 The linear imager scanner offers four levels of decode security for UPC/EAN, and Code 93. Select increasing levels of security for decreasing levels of bar code quality. There is an inverse relationship between security and linear imager scanner aggressiveness, so choose only that level of security necessary for any given application.

  • Page 276: Intercharacter Gap Size

    11 - 68 LI4278 Product Reference Guide Intercharacter Gap Size Parameter # 381 The Code 39 and Codabar symbologies have an intercharacter gap that is typically quite small. Due to various bar code-printing technologies, this gap can grow larger than the maximum size allowed, preventing the linear imager scanner from decoding the symbol.

  • Page 277: Rules: Criteria Linked To Actions

    CHAPTER 12 ADVANCED DATA FORMATTING Introduction Advanced Data Formatting (ADF) is a means of customizing data before transmission to the host device. Scan data can be edited to suit particular requirements. To implement ADF, scan a related series of bar codes, which begin onpage 12-8, which allows programming the linear imager scanner with Advanced Data Formatting (ADF) Rules.

  • Page 278: Using Adf Bar Codes

    12 - 2 LI4278 Product Reference Guide Using ADF Bar Codes When programming a rule, make sure the rule is logically correct. Plan ahead before scanning. To program each data formatting rule: Start the Rule. Scan • Begin New Rule on page 12-8.

  • Page 279: Rule 1: The Code 128 Scanning Rule

    ADVANCED DATA FORMATTING 12 - 3 Rule 1: The Code 128 Scanning Rule Step Bar Code On Page Beep Indication Begin New Rule High High 12-8 Code 128 High High 12-11 Send next 5 characters High High 12-25 Send <CTRL M> High High 12-47 Send next 5 characters...

  • Page 280: Rules Hierarchy (in Bar Codes)

    12 - 4 LI4278 Product Reference Guide To implement this, first enter an ADF rule that applies to the normal situation, such as: Scan Rule Belongs to Set 1. When scanning a bar code of length 15, send the next 2 characters, send the class key, send the next 8 characters, send the stock key, send the data that remains, send the Enter key.

  • Page 281: Default Rules

    ADVANCED DATA FORMATTING 12 - 5 Default Rules Every unit has a default rule to send all scan data. Units with custom software may have one or more default rules burned in. The rules hierarchy checks user programmable rules first, then the default rules. Disable default rules by entering the following general rule in the user programmable buffer: When receiving scan data, send all data.

  • Page 282: Adf Bar Codes

    12 - 6 LI4278 Product Reference Guide ADF Bar Codes lists the bar codes available through ADF. Table 12-1 ADF Bar Codes Table 12-1 Page Parameter Number Special Commands 12-8 Pause Duration 12-8 Begin New Rule 12-8 Save Rule 12-8...

  • Page 283

    ADVANCED DATA FORMATTING 12 - 7 ADF Bar Codes (Continued) Table 12-1 Page Parameter Number Skip Back 12-32 Send Preset Value 12-34 Remove All Spaces 12-34 Crunch All Spaces 12-34 Stop Space Removal 12-34 Remove Leading Zeros 12-35 Stop Zero Removal 12-35 Pad Data with Spaces 12-36...

  • Page 284: Special Commands

    12 - 8 LI4278 Product Reference Guide Special Commands Pause Duration Use this parameter, along with to insert a pause in the data transmission. Set the Send Pause on page 12-30, pause by scanning a two-digit number (i.e., two bar codes) from in 0.1...

  • Page 285: Erase

    ADVANCED DATA FORMATTING 12 - 9 Erase Use these bar codes to erase criteria, actions, or rules. Erase Criteria And Start Again Erase Actions And Start Again Erase Previously Saved Rule Erase All Rules Quit Entering Rules Scan the bar code below to quit entering rules. Quit Entering Rules...

  • Page 286: Disable Rule Set

    12 - 10 LI4278 Product Reference Guide Disable Rule Set Use these bar codes to disable rule sets. Disable Rule Set 1 Disable Rule Set 2 Disable Rule Set 3 Disable Rule Set 4 Disable All Rule Sets...

  • Page 287: Criteria

    ADVANCED DATA FORMATTING 12 - 11 Criteria Code Types Scan the bar codes for all codes to be affected by the rule. Scan the codes prior to selecting other criteria. To select all code types, do not scan any code type Code 39 Codabar GS1 DataBar-14...

  • Page 288

    12 - 12 LI4278 Product Reference Guide Code Types (continued) IATA 2 OF 5 I 2 OF 5 Code 93 UPC-A UPC-E EAN-8 EAN-13...

  • Page 289

    ADVANCED DATA FORMATTING 12 - 13 Code Types (continued) GS1-128 UPC-E1 Bookland EAN Trioptic Code 39 Code 11 Code 32...

  • Page 290

    12 - 14 LI4278 Product Reference Guide Code Types (continued) ISBT 128 Coupon Code Chinese 2 of 5 Matrix 2 of 5 ISSN EAN...

  • Page 291: Code Lengths

    ADVANCED DATA FORMATTING 12 - 15 Code Lengths Scan these bar codes to define the number of characters the selected code type must contain. Select one length per rule only. Do not select any code length to select code types of any length. 1 Character 2 Characters 3 Characters...

  • Page 292

    12 - 16 LI4278 Product Reference Guide Code Lengths (continued) 7 Characters 8 Characters 9 Characters 10 Characters 11 Characters 12 Characters 13 Characters...

  • Page 293

    ADVANCED DATA FORMATTING 12 - 17 Code Lengths (continued) 14 Characters 15 Characters 16 Characters 17 Characters 18 Characters 19 Characters 20 Characters...

  • Page 294

    12 - 18 LI4278 Product Reference Guide Code Lengths (continued) 21 Characters 22 Characters 23 Characters 24 Characters 25 Characters 26 Characters 27 Characters...

  • Page 295: Message Containing A Specific Data String

    ADVANCED DATA FORMATTING 12 - 19 Code Lengths (continued) 28 Characters 29 Characters 30 Characters Message Containing A Specific Data String Use this feature to select whether the formatting affects data that begins with a specific character or data string, or contains a specific character or data string. There are 4 features: Specific String at Start •...

  • Page 296: Specific String, Any Location

    12 - 20 LI4278 Product Reference Guide Specific String, Any Location Scan the following bar code. Enter a location by scanning a two-digit number representing the position (use a leading “zero” if necessary) using the Numeric Keypad on page 12-21.

  • Page 297: Numeric Keypad

    ADVANCED DATA FORMATTING 12 - 21 Numeric Keypad Do not confuse bar codes on this page with those on the alphanumeric keyboard.

  • Page 298

    12 - 22 LI4278 Product Reference Guide Numeric Keypad (continued) Cancel...

  • Page 299: Rule Belongs To Set

    ADVANCED DATA FORMATTING 12 - 23 Rule Belongs To Set Select the set to which a rule belongs. There are four possible rule sets. See Alternate Rule Sets on page 12-3 for more information about rule sets. Rule Belongs To Set 1 Rule Belongs To Set 2 Rule Belongs To Set 3 Rule Belongs To Set 4...

  • Page 300: Actions

    12 - 24 LI4278 Product Reference Guide Actions Select how to format the data for transmission. Send Data Send all data that remains, send all data up to a specific character selected from the Alphanumeric Keyboard 12-89, or send the next X characters. Note that only bar codes for Send Next 1 to 20 appear here, on page and can be scanned multiple times to send values greater then 20.

  • Page 301

    ADVANCED DATA FORMATTING 12 - 25 Send Data (continued) Send Next 5 Characters Send Next 6 Characters Send Next 7 Characters Send Next 8 Characters Send Next 9 Characters Send Next 10 Characters Send Next 11 Characters...

  • Page 302

    12 - 26 LI4278 Product Reference Guide Send Data (continued) Send Next 12 Characters Send Next 13 Characters Send Next 14 Characters Send Next 15 Characters Send Next 16 Characters Send Next 17 Characters Send Next 18 Characters...

  • Page 303

    ADVANCED DATA FORMATTING 12 - 27 Send Data (continued) Send Next 19 Characters Send Next 20 Characters...

  • Page 304: Setup Field(s)

    12 - 28 LI4278 Product Reference Guide Setup Field(s) Setup Field(s) Definitions Table 12-2 Parameter Description Page Move Cursor Move Cursor To a Character Scan the 12-29, then any printable Move Cursor To Character on page 12-29 ASCII character from the 12-89.

  • Page 305

    ADVANCED DATA FORMATTING 12 - 29 Move Cursor To Character Move Cursor To Start Move Cursor Past Character Move Cursor Past Specific String Move Cursor to Specific String and Replace...

  • Page 306: Send Pause

    12 - 30 LI4278 Product Reference Guide Move Cursor (continued) Move Cursor to Last Occurrence of String and Replace All Skip to End Send Pause Scan the bar code below to insert a pause in the transmission of data. See...

  • Page 307: Skip Ahead

    ADVANCED DATA FORMATTING 12 - 31 Skip Ahead Use the following bar codes to skip ahead characters. Skip Ahead 1 Character Skip Ahead 2 Characters Skip Ahead 3 Characters Skip Ahead 4 Characters Skip Ahead 5 Characters Skip Ahead 6 Characters Skip Ahead 7 Characters...

  • Page 308: Skip Back

    12 - 32 LI4278 Product Reference Guide Skip Ahead (continued) Skip Ahead 8 Characters Skip Ahead 9 Characters Skip Ahead 10 Characters Skip Back Use the following bar codes to skip back characters. Skip Back 1 Character Skip Back 2 Characters...

  • Page 309

    ADVANCED DATA FORMATTING 12 - 33 Skip Back (continued) Skip Back 4 Characters Skip Back 5 Characters Skip Back 6 Characters Skip Back 7 Characters Skip Back 8 Characters Skip Back 9 Characters Skip Back 10 Characters...

  • Page 310: Send Preset Value

    12 - 34 LI4278 Product Reference Guide Send Preset Value Use these bar codes to send preset values. See to set these values. Prefix/Suffix Values on page 5-19 Send Prefix Send Suffix Modify Data Modify data as described below. The following actions work for all send commands that follow it within a rule.

  • Page 311: Remove Leading Zeros

    ADVANCED DATA FORMATTING 12 - 35 Remove Leading Zeros Scan the bar code below to remove all leading zeros. Remove Leading Zeros Stop Zero Removal Scan the bar code below to disable the removal of zeros. Stop Zero Removal...

  • Page 312: Pad Data With Spaces

    12 - 36 LI4278 Product Reference Guide Pad Data with Spaces To pad data to the left, scan the bar code containing the desired number of spaces. Use Send commands to activate this parameter. Pad Spaces To Length 1 Pad Spaces To Length 2...

  • Page 313

    ADVANCED DATA FORMATTING 12 - 37 Pad Data with Spaces (continued) Pad Spaces To Length 8 Pad Spaces To Length 9 Pad Spaces To Length 10 Pad Spaces To Length 11 Pad Spaces To Length 12 Pad Spaces To Length 13 Pad Spaces To Length 14...

  • Page 314

    12 - 38 LI4278 Product Reference Guide Pad Data with Spaces (continued) Pad Spaces To Length 15 Pad Spaces To Length 16 Pad Spaces To Length 17 Pad Spaces To Length 18 Pad Spaces To Length 19 Pad Spaces To Length 20...

  • Page 315

    ADVANCED DATA FORMATTING 12 - 39 Pad Data with Spaces (continued) Pad Spaces To Length 22 Pad Spaces To Length 23 Pad Spaces To Length 24 Pad Spaces To Length 25 Pad Spaces To Length 26 Pad Spaces To Length 27 Pad Spaces To Length 28...

  • Page 316: Pad Data With Zeros

    12 - 40 LI4278 Product Reference Guide Pad Data with Spaces (continued) Pad Spaces To Length 29 Pad Spaces To Length 30 Stop Pad Spaces Pad Data with Zeros To pad data to the left, scan the bar code containing the desired number of zeros. Use Send commands to activate this parameter.

  • Page 317

    ADVANCED DATA FORMATTING 12 - 41 Pad Data with Zeros (continued) Pad Zeros To Length 4 Pad Zeros To Length 5 Pad Zeros To Length 6 Pad Zeros To Length 7 Pad Zeros To Length 8 Pad Zeros To Length 9 Pad Zeros To Length 10...

  • Page 318

    12 - 42 LI4278 Product Reference Guide Pad Data with Zeros (continued) Pad Zeros To Length 11 Pad Zeros To Length 12 Pad Zeros To Length 13 Pad Zeros To Length 14 Pad Zeros To Length 15 Pad Zeros To Length 16...

  • Page 319

    ADVANCED DATA FORMATTING 12 - 43 Pad Data with Zeros (continued) Pad Zeros To Length 18 Pad Zeros To Length 19 Pad Zeros To Length 20 Pad Zeros To Length 21 Pad Zeros To Length 22 Pad Zeros To Length 23 Pad Zeros To Length 24...

  • Page 320

    12 - 44 LI4278 Product Reference Guide Pad Data with Zeros (continued) Pad Zeros To Length 25 Pad Zeros To Length 26 Pad Zeros To Length 27 Pad Zeros To Length 28 Pad Zeros To Length 29 Pad Zeros To Length 30...

  • Page 321: Beeps

    ADVANCED DATA FORMATTING 12 - 45 Beeps Select a beep sequence for each ADF rule. Beep Once Beep Twice Beep Three Times Send Keystroke (Control Characters and Keyboard Characters) Control Characters Scan a Send bar code for the keystroke to send. Send Control 2 Send Control A Send Control B...

  • Page 322

    12 - 46 LI4278 Product Reference Guide Control Characters (continued) Send Control C Send Control D Send Control E Send Control F Send Control G Send Control H Send Control I...

  • Page 323

    ADVANCED DATA FORMATTING 12 - 47 Control Characters (continued) Send Control J Send Control K Send Control L Send Control M Send Control N Send Control O Send Control P...

  • Page 324

    12 - 48 LI4278 Product Reference Guide Control Characters (continued) Send Control Q Send Control R Send Control S Send Control T Send Control U Send Control V Send Control W...

  • Page 325

    ADVANCED DATA FORMATTING 12 - 49 Control Characters (continued) Send Control X Send Control Y Send Control Z Send Control [ Send Control \ Send Control ]...

  • Page 326: Keyboard Characters

    12 - 50 LI4278 Product Reference Guide Control Characters (continued) Send Control 6 Send Control - Keyboard Characters Scan a Send bar code for the keyboard characters to send. Send Space Send ! Send “ Send #...

  • Page 327

    ADVANCED DATA FORMATTING 12 - 51 Keyboard Characters (continued) Send $ Send % Send & Send ‘ Send ( Send ) Send *...

  • Page 328

    12 - 52 LI4278 Product Reference Guide Keyboard Characters (continued) Send + Send , Send - Send . Send / Send 0 Send 1...

  • Page 329

    ADVANCED DATA FORMATTING 12 - 53 Keyboard Characters (continued) Send 2 Send 3 Send 4 Send 5 Send 6 Send 7 Send 8...

  • Page 330

    12 - 54 LI4278 Product Reference Guide Keyboard Characters (continued) Send 9 Send : Send ; Send < Send = Send > Send ?

  • Page 331

    ADVANCED DATA FORMATTING 12 - 55 Keyboard Characters (continued) Send @ Send A Send B Send C Send D Send E Send F...

  • Page 332

    12 - 56 LI4278 Product Reference Guide Keyboard Characters (continued) Send G Send H Send I Send J Send K Send L Send M...

  • Page 333

    ADVANCED DATA FORMATTING 12 - 57 Keyboard Characters (continued) Send N Send O Send P Send Q Send R Send S Send T...

  • Page 334

    12 - 58 LI4278 Product Reference Guide Keyboard Characters (continued) Send U Send V Send W Send X Send Y Send Z Send [...

  • Page 335

    ADVANCED DATA FORMATTING 12 - 59 Keyboard Characters (continued) Send \ Send ] Send ^ Send _ Send ` Send a Send b...

  • Page 336

    12 - 60 LI4278 Product Reference Guide Keyboard Characters (continued) Send c Send d Send e Send f Send g Send h Send i...

  • Page 337

    ADVANCED DATA FORMATTING 12 - 61 Keyboard Characters (continued) Send j Send k Send l Send m Send n Send o Send p...

  • Page 338

    12 - 62 LI4278 Product Reference Guide Keyboard Characters (continued) Send q Send r Send s Send t Send u Send v Send w...

  • Page 339

    ADVANCED DATA FORMATTING 12 - 63 Keyboard Characters (continued) Send x Send y Send z Send { Send | Send } Send ~...

  • Page 340: Send Alt Characters

    12 - 64 LI4278 Product Reference Guide Send ALT Characters Send Alt 2 Send Alt 6 Send Alt A Send Alt B Send Alt C Send Alt D Send Alt E...

  • Page 341

    ADVANCED DATA FORMATTING 12 - 65 Send ALT Characters (continued) Send Alt F Send Alt G Send Alt H Send Alt I Send Alt J Send Alt K Send Alt L...

  • Page 342

    12 - 66 LI4278 Product Reference Guide Send ALT Characters (continued) Send Alt M Send Alt N Send Alt O Send Alt P Send Alt Q Send Alt R Send Alt S...

  • Page 343

    ADVANCED DATA FORMATTING 12 - 67 Send ALT Characters (continued) Send Alt T Send Alt U Send Alt V Send Alt W Send Alt X Send Alt Y Send Alt Z...

  • Page 344

    12 - 68 LI4278 Product Reference Guide Send ALT Characters (continued) Send Alt [ Send Alt \ Send Alt ] Send Alt @ Send Alt -...

  • Page 345: Send Keypad Characters

    ADVANCED DATA FORMATTING 12 - 69 Send Keypad Characters Send Keypad * Send Keypad + Send Keypad - Send Keypad . Send Keypad / Send Keypad 0 Send Keypad 1...

  • Page 346

    12 - 70 LI4278 Product Reference Guide Send Keypad Characters (continued) Send Keypad 2 Send Keypad 3 Send Keypad 4 Send Keypad 5 Send Keypad 6 Send Keypad 7 Send Keypad 8...

  • Page 347

    ADVANCED DATA FORMATTING 12 - 71 Send Keypad Characters (continued) Send Keypad 9 Send Keypad Enter Send Keypad Numlock Send Break Key Send Delete Key Send Page Up Key Send End Key...

  • Page 348

    12 - 72 LI4278 Product Reference Guide Send Keypad Characters (continued) Send Page Down Key Send Pause Key Send Scroll Lock Key Send Backspace Key Send Tab Key Send Print Screen Key Send Insert Key...

  • Page 349

    ADVANCED DATA FORMATTING 12 - 73 Send Keypad Characters (continued) Send Home Key Send Enter Key Send Escape Key Send Up Arrow Key Send Down Arrow Key Send Left Arrow Key Send Right Arrow Key...

  • Page 350: Send Function Key

    12 - 74 LI4278 Product Reference Guide Send Function Key Send F1 Key Send F2 Key Send F3 Key Send F4 Key Send F5 Key Send F6 Key Send F7 Key...

  • Page 351

    ADVANCED DATA FORMATTING 12 - 75 Send Function Key (continued) Send F8 Key Send F9 Key Send F10 Key Send F11 Key Send F12 Key Send F13 Key Send F14 Key...

  • Page 352

    12 - 76 LI4278 Product Reference Guide Send Function Key (continued) Send F15 Key Send F16 Key Send F17 Key Send F18 Key Send F19 Key Send F20 Key Send F21 Key...

  • Page 353

    ADVANCED DATA FORMATTING 12 - 77 Send Function Key (continued) Send F22 Key Send F23 Key Send F24 Key Send PF1 Key Send PF2 Key Send PF3 Key Send PF4 Key...

  • Page 354

    12 - 78 LI4278 Product Reference Guide Send Function Key (continued) Send PF5 Key Send PF6 Key Send PF7 Key Send PF8 Key Send PF9 Key Send PF10 Key Send PF11 Key...

  • Page 355

    ADVANCED DATA FORMATTING 12 - 79 Send Function Key (continued) Send PF12 Key Send PF13 Key Send PF14 Key Send PF15 Key Send PF16 Key Send PF17 Key Send PF18 Key...

  • Page 356

    12 - 80 LI4278 Product Reference Guide Send Function Key (continued) Send PF19 Key Send PF20 Key Send PF21 Key Send PF22 Key Send PF23 Key Send PF24 Key Send PF25 Key...

  • Page 357: Send Right Control Key

    ADVANCED DATA FORMATTING 12 - 81 Send Function Key (continued) Send PF26 Key Send PF27 Key Send PF28 Key Send PF29 Key Send PF30 Key Send Right Control Key The “Send Right Control Key” action will send a tap (press and release) of the Right Control Key. Send Right Control Key...

  • Page 358: Send Graphic User Interface (gui) Characters

    12 - 82 LI4278 Product Reference Guide Send Graphic User Interface (GUI) Characters The Send Graphic User Interface Character actions taps the specified key while holding the System Dependent Graphic User Interface (GUI) Key. The definition of the Graphic User Interface key depends on the attached system.

  • Page 359

    ADVANCED DATA FORMATTING 12 - 83 Send Graphic User Interface (GUI) Characters (continued) Send GUI 6 Send GUI 7 Send GUI 8 Send GUI 9 Send GUI A Send GUI B Send GUI C...

  • Page 360

    12 - 84 LI4278 Product Reference Guide Send Graphic User Interface (GUI) Characters (continued) Send GUI D Send GUI E Send GUI F Send GUI G Send GUI H Send GUI I Send GUI J...

  • Page 361

    ADVANCED DATA FORMATTING 12 - 85 Send Graphic User Interface (GUI) Characters (continued) Send GUI K Send GUI L Send GUI M Send GUI N Send GUI O Send GUI P Send GUI Q...

  • Page 362

    12 - 86 LI4278 Product Reference Guide Send Graphic User Interface (GUI) Characters (continued) Send GUI R Send GUI S Send GUI T Send GUI U Send GUI V Send GUI W Send GUI X...

  • Page 363: Turn On/off Rule Sets

    ADVANCED DATA FORMATTING 12 - 87 Send Graphic User Interface (GUI) Characters (continued) Send GUI Y Send GUI Z Turn On/Off Rule Sets Use these bar codes to turn rule sets on and off. Turn On Rule Set 1 Turn On Rule Set 2 Turn On Rule Set 3 Turn On Rule Set 4...

  • Page 364

    12 - 88 LI4278 Product Reference Guide Turn On/Off Rule Sets (continued) Use these bar codes to turn rule sets on and off. Turn Off Rule Set 1 Turn Off Rule Set 2 Turn Off Rule Set 3 Turn Off Rule Set 4...

  • Page 365: Alphanumeric Keyboard

    ADVANCED DATA FORMATTING 12 - 89 Alphanumeric Keyboard Space (Single Quote) (Dash)

  • Page 366

    12 - 90 LI4278 Product Reference Guide Alphanumeric Keyboard (continued) (Comma) “ & ‘...

  • Page 367

    ADVANCED DATA FORMATTING 12 - 91 Alphanumeric Keyboard (continued) < >...

  • Page 368

    12 - 92 LI4278 Product Reference Guide Alphanumeric Keyboard (continued) (Underscore)

  • Page 369

    ADVANCED DATA FORMATTING 12 - 93 Alphanumeric Keyboard (continued) NOTE Do not confuse the numeric bar codes below with those on the numeric keypad.

  • Page 370

    12 - 94 LI4278 Product Reference Guide Alphanumeric Keyboard (continued)

  • Page 371

    ADVANCED DATA FORMATTING 12 - 95 Alphanumeric Keyboard (continued)

  • Page 372

    12 - 96 LI4278 Product Reference Guide Alphanumeric Keyboard (continued)

  • Page 373

    ADVANCED DATA FORMATTING 12 - 97 Alphanumeric Keyboard (continued)

  • Page 374

    12 - 98 LI4278 Product Reference Guide Alphanumeric Keyboard (continued) Cancel End of Message...

  • Page 375

    ADVANCED DATA FORMATTING 12 - 99 Alphanumeric Keyboard (continued)

  • Page 376

    12 - 100LI4278 Product Reference Guide Alphanumeric Keyboard (continued)

  • Page 377

    ADVANCED DATA FORMATTING12 - 101 Alphanumeric Keyboard (continued)

  • Page 378

    12 - 102LI4278 Product Reference Guide Alphanumeric Keyboard (continued)

  • Page 379

    APPENDIX A STANDARD DEFAULT PA- RAMETERS NOTE In this guide, the parameter numbers listed are the same as the attribute numbers for these parameters. Standard Default Parameters Table Table A-1 Paramete Page Parameter Default r Number Number Radio Communications Radio Communications (Host Type) Cradle Host BT Friendly Name Discoverable Mode...

  • Page 380

    A - 2 LI4278 Product Reference Guide Standard Default Parameters Table (Continued) Table A-1 Paramete Page Parameter Default r Number Number Reconnect Attempt Interval 30 sec 4-16 Auto-reconnect in Bluetooth Keyboard Emulation On Bar Code Data 4-18 (HID Slave) Mode...

  • Page 381

    STANDARD DEFAULT PARAMETERS A - 3 Standard Default Parameters Table (Continued) Table A-1 Paramete Page Parameter Default r Number Number Time Delay to Low Power Mode 100 msec 5-11 Time Delay to Presentation Sleep Mode 5 Min 5-12 Timeout to Low Power Mode from Auto Aim 15 Sec 5-14 Continuous Bar Code Read...

  • Page 382

    A - 4 LI4278 Product Reference Guide Standard Default Parameters Table (Continued) Table A-1 Paramete Page Parameter Default r Number Number Function Key Mapping Disable 6-10 FN1 Substitution Disable 6-10 Send and Make Break Send 6-11 RS-232 Host Parameters RS-232 Host Types...

  • Page 383

    STANDARD DEFAULT PARAMETERS A - 5 Standard Default Parameters Table (Continued) Table A-1 Paramete Page Parameter Default r Number Number Function Key Mapping Disable 8-12 Simulated Caps Lock Disable 8-13 Convert Case No Case Conversion 8-14 USB Static CDC Enable 8-14 Ignore Beep Disable...

  • Page 384

    A - 6 LI4278 Product Reference Guide Standard Default Parameters Table (Continued) Table A-1 Paramete Page Parameter Default r Number Number UPC-E1 Preamble System Character 11-18 Convert UPC-E to A Disable 11-19 Convert UPC-E1 to A Disable 11-19 EAN-8/JAN-8 Extend...

  • Page 385

    STANDARD DEFAULT PARAMETERS A - 7 Standard Default Parameters Table (Continued) Table A-1 Paramete Page Parameter Default r Number Number Code 11 Disable 11-37 Set Lengths for Code 11 28, 29 4 to 55 11-37 Code 11 Check Digit Verification Disable 11-39 Transmit Code 11 Check Digit(s)

  • Page 386

    A - 8 LI4278 Product Reference Guide Standard Default Parameters Table (Continued) Table A-1 Paramete Page Parameter Default r Number Number Matrix 2 of 5 Lengths 619, 620 1 Length - 14 11-57 Matrix 2 of 5 Check Digit Disable...

  • Page 387

    APPENDIX B PROGRAMMING REFERENCE Symbol Code Identifiers Symbol Code Characters Table B-1 Code Character Code Type UPC-A, UPC-E, UPC-E1, EAN-8, EAN-13 Code 39, Code 32 Codabar Code 128, ISBT 128, ISBT 128 Concatenated Code 93 Interleaved 2 of 5 Discrete 2 of 5, or Discrete 2 of 5 IATA Code 11 GS1-128 Bookland EAN...

  • Page 388

    B - 2 LI4278 Product Reference Guide Symbol Code Characters (Continued) Table B-1 Code Character Code Type Chinese 2 of 5 Korean 3 of 5 ISSN EAN...

  • Page 389: Aim Code Identifiers

    PROGRAMMING REFERENCE B - 3 AIM Code Identifiers Each AIM Code Identifier contains the three-character string ]cm where: = Flag Character (ASCII 93) c = Code Character (see Table B-2) m = Modifier Character (see Table B-3) Aim Code Characters Table B-2 Code Character Code Type...

  • Page 390

    B - 4 LI4278 Product Reference Guide The modifier character is the sum of the applicable option values based on Table B-3 Modifier Characters Table B-3 Code Type Option Value Option No check character or Full ASCII processing. Code 39 Reader has checked one check character.

  • Page 391

    PROGRAMMING REFERENCE B - 5 Modifier Characters (Continued) Table B-3 Code Type Option Value Option No options specified at this time. Always transmit 0. D 2 of 5 Example: A D 2 of 5 bar code 4123, is transmitted as ]S04123 Standard data packet in full EAN format, i.e.

  • Page 392

    B - 6 LI4278 Product Reference Guide...

  • Page 393: Appendix C: Sample Bar Codes Code 39

    APPENDIX C SAMPLE BAR CODES Code 39 123ABC UPC/EAN UPC-A, 100% 12345 67890...

  • Page 394: Ean-13, 100%

    C - 2 LI4278 Product Reference Guide EAN-13, 100% 3 4 5 67 8 9 0 1 2 3 4 0 Code 128 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4...

  • Page 395

    SAMPLE BAR CODES C - 3 GS1 DataBar NOTE GS1 DataBar variants must be enabled to read the bar codes below (see GS1 DataBar on page 11-61). 10293847560192837465019283746029478450366523 (GS1 DataBar Expanded Stacked) 1234890hjio9900mnb (GS1 DataBar Expanded) 08672345650916 (GS1 DataBar Limited) GS1 DataBar-14 55432198673467 (GS1 DataBar-14 Truncated)

  • Page 396

    C - 4 LI4278 Product Reference Guide...

  • Page 397

    APPENDIX D NUMERIC BAR CODES Numeric Bar Codes For parameters requiring specific numeric values, scan the appropriately numbered bar code(s).

  • Page 398

    D - 2 LI4278 Product Reference Guide...

  • Page 399

    NUMERIC BAR CODES D - 3 Cancel To correct an error or change a selection, scan the bar code below. Cancel...

  • Page 400

    D - 4 LI4278 Product Reference Guide...

  • Page 401

    APPENDIX E ALPHANUMERIC BAR CODES Alphanumeric Keyboard Space...

  • Page 402

    E - 2 LI4278 Product Reference Guide Alphanumeric Keyboard (continued)

  • Page 403

    ALPHANUMERIC BAR CODES E - 3 Alphanumeric Keyboard (continued) “ & ‘...

  • Page 404

    E - 4 LI4278 Product Reference Guide Alphanumeric Keyboard (continued) < >...

  • Page 405

    ALPHANUMERIC BAR CODES E - 5 Alphanumeric Keyboard (continued)

  • Page 406

    E - 6 LI4278 Product Reference Guide Alphanumeric Keyboard (continued) NOTE The bar codes that follow should not be confused with those on the numeric keypad.

  • Page 407

    ALPHANUMERIC BAR CODES E - 7 Alphanumeric Keyboard (continued) End of Message Cancel...

  • Page 408

    E - 8 LI4278 Product Reference Guide Alphanumeric Keyboard (continued)

  • Page 409

    ALPHANUMERIC BAR CODES E - 9 Alphanumeric Keyboard (continued)

  • Page 410

    E - 10 LI4278 Product Reference Guide Alphanumeric Keyboard (continued)

  • Page 411

    ALPHANUMERIC BAR CODES E - 11 Alphanumeric Keyboard (continued)

  • Page 412

    E - 12 LI4278 Product Reference Guide Alphanumeric Keyboard (continued)

  • Page 413

    ALPHANUMERIC BAR CODES E - 13 Alphanumeric Keyboard (continued)

  • Page 414

    E - 14 LI4278 Product Reference Guide Alphanumeric Keyboard (continued)

  • Page 415

    ALPHANUMERIC BAR CODES E - 15 Alphanumeric Keyboard (continued)

  • Page 416

    E - 16 LI4278 Product Reference Guide Alphanumeric Keyboard (continued)

  • Page 417

    ALPHANUMERIC BAR CODES E - 17 Alphanumeric Keyboard (continued)

  • Page 418

    E - 18 LI4278 Product Reference Guide...

  • Page 419

    APPENDIX F ASCII CHARACTER SETS ASCII Value Table Table F-1 Full ASCII ASCII Value Keystroke Code 39 Encode Character 1000 CTRL 2 1001 CTRL A 1002 CTRL B 1003 CTRL C 1004 CTRL D 1005 CTRL E 1006 CTRL F 1007 CTRL G 1008...

  • Page 420

    F - 2 LI4278 Product Reference Guide ASCII Value Table (Continued) Table F-1 Full ASCII ASCII Value Keystroke Code 39 Encode Character 1016 CTRL P 1017 CTRL Q 1018 CTRL R 1019 CTRL S 1020 CTRL T 1021 CTRL U...

  • Page 421

    ASCII CHARACTER SETS F - 3 ASCII Value Table (Continued) Table F-1 Full ASCII ASCII Value Keystroke Code 39 Encode Character 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 < 1061 1062 >...

  • Page 422

    F - 4 LI4278 Product Reference Guide ASCII Value Table (Continued) Table F-1 Full ASCII ASCII Value Keystroke Code 39 Encode Character 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091...

  • Page 423

    ASCII CHARACTER SETS F - 5 ASCII Value Table (Continued) Table F-1 Full ASCII ASCII Value Keystroke Code 39 Encode Character 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124...

  • Page 424

    F - 6 LI4278 Product Reference Guide ALT Key Standard Default Tables Table F-2 ALT Keys Keystroke 2064 ALT 2 2065 ALT A 2066 ALT B 2067 ALT C 2068 ALT D 2069 ALT E 2070 ALT F 2071 ALT G...

  • Page 425

    ASCII CHARACTER SETS F - 7 Misc. Key Standard Default Table Table F-3 Misc. Key Keystroke 3001 PA 1 3002 PA 2 3003 CMD 1 3004 CMD 2 3005 CMD 3 3006 CMD 4 3007 CMD 5 3008 CMD 6 3009 CMD 7 3010...

  • Page 426

    F - 8 LI4278 Product Reference Guide GUI Shift Keys (Continued) Table F-4 Other Value Keystroke 3065 GUI A 3066 GUI B 3067 GUI C 3068 GUI D 3069 GUI E 3070 GUI F 3071 GUI G 3072 GUI H...

  • Page 427

    ASCII CHARACTER SETS F - 9 PF Key Standard Default Table Table F-5 PF Keys Keystroke 4001 PF 1 4002 PF 2 4003 PF 3 4004 PF 4 4005 PF 5 4006 PF 6 4007 PF 7 4008 PF 8 4009 PF 9 4010...

  • Page 428

    F - 10 LI4278 Product Reference Guide F key Standard Default Table (Continued) Table F-6 F Keys Keystroke 5012 F 12 5013 F 13 5014 F 14 5015 F 15 5016 F 16 5017 F 17 5018 F 18 5019...

  • Page 429

    ASCII CHARACTER SETS F - 11 Numeric Key Standard Default Table (Continued) Table F-7 Numeric Keypad Keystroke 6057 6058 Enter 6059 Num Lock Extended Keypad Standard Default Table Table F-8 Extended Keypad Keystroke 7001 Break 7002 Delete 7003 Pg Up 7004 7005 Pg Dn...

  • Page 430

    F - 12 LI4278 Product Reference Guide...

  • Page 431

    INDEX send value ......12-33 Numerics skip ahead "n" characters ....12-27 123Scan2 .

  • Page 432

    Index - 2 LI4278 PRODUCT REFERENCE GUIDE skip ahead characters ....12-30 code 128 ......11-23 skip back characters .

  • Page 433: Table Of Contents

    Index - 3 keyboard wedge timeout between decodes, alternate numeric keypad emulation ..6-8 different symbols ....5-16 caps lock on ......6-9 timeout between decodes, same symbol .

  • Page 434

    Index - 4 LI4278 PRODUCT REFERENCE GUIDE parameter programming ....2-3 code 93 bar codes scanning ....... 2-1 code 93 .

  • Page 435

    Index - 5 RS-232 transmission ....7-11 transmission ......3-5, 7-15 maintenance .

  • Page 436

    Index - 6 LI4278 PRODUCT REFERENCE GUIDE parameter defaults reconnect attempt beep ....4-15 all ........A-1 range indicator .

  • Page 437

    Index - 7 master ......4-3, 4-14, 4-21 pairing ....... . . 4-3 slave .

  • Page 438

    Index - 8 LI4278 PRODUCT REFERENCE GUIDE...

  • Page 439

    GLOSSARY Aperture. The opening in an optical system defined by a lens or baffle that establishes the field of view. API. An interface by means of which one software component communicates with or controls another. Usually used to refer to services provided by one software component to another, usually via software interrupts or function calls Application Programming Interface.

  • Page 440

    Glossary - 2 LI4278 PRODUCT REFERENCE GUIDE Bit. Binary digit. One bit is the basic unit of binary information. Generally, eight consecutive bits compose one byte of data. The pattern of 0 and 1 values within the byte determines its meaning.

  • Page 441

    Glossary - 3 Code Length. Number of data characters in a bar code between the start and stop characters, not including those characters. Cold Boot. A cold boot restarts the mobile computer and erases all user stored records and entries. COM port.

  • Page 442

    Glossary - 4 LI4278 PRODUCT REFERENCE GUIDE Flash Disk. An additional megabyte of non-volatile memory for storing application and configuration files. Flash Memory. Flash memory is responsible for storing the system firmware and is non-volatile. If the system power is interrupted the data is not be lost.

  • Page 443

    Glossary - 5 I/O Ports. interface The connection between two devices, defined by common physical characteristics, signal characteristics, and signal meanings. Types of interfaces include RS-232 and PCMCIA. IOCTL. Input/Output Control. IP Address. (Internet Protocol address) The address of a computer attached to an IP network. Every client and server station must have a unique IP address.

  • Page 444

    Glossary - 6 LI4278 PRODUCT REFERENCE GUIDE Misread (Misdecode). A condition which occurs when the data output of a reader or interface controller does not agree with the data encoded within a bar code symbol. Multi-Point Mode. Up to the maximum number of scanners can be connected to the cradle; Standard cradle - three scanners;...

  • Page 445

    Glossary - 7 Open System Authentication. Open System authentication is a null authentication algorithm. PAN . Personal area network. Using Bluetooth wireless technology, PANs enable devices to communicate wirelessly. Generally, a wireless PAN consists of a dynamic group of less than 255 devices that communicate within about a 33-foot range.

  • Page 446

    Glossary - 8 LI4278 PRODUCT REFERENCE GUIDE Quiet Zone. A clear space, containing no dark marks, which precedes the start character of a bar code symbol and follows the stop character. QWERTY. A standard keyboard commonly used on North American and some European PC keyboards. “QWERTY”...

  • Page 447

    Glossary - 9 SID. System Identification code. An identifier issued by the FCC for each market. It is also broadcast by the cellular carriers to allow cellular devices to distinguish between the home and roaming service. Soft Reset. See Warm Boot. Space.

  • Page 448

    Glossary - 10 LI4278 PRODUCT REFERENCE GUIDE Telnet. A terminal emulation protocol commonly used on the Internet and TCP/IP-based networks. It allows a user at a terminal or computer to log onto a remote device and run a program. Terminal Emulation. A “terminal emulation” emulates a character-based mainframe session on a remote non-mainframe terminal, including all display features, commands and function keys.

  • Page 450

    MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners. © 2013 Motorola Solutions, Inc. All Rights Reserved.

Comments to this Manuals

Symbols: 0
Latest comments: