Motorola CA50 Developer & User Manual page 178

7 - 10 CA50/UCA Client & Server Developer & User Guide
•
NotifNoCall
Defines the alert behavior when receiving a notification message while not on a phone call.
There are three alert resources:
Tone: A tone plays based on information from either the data within the notification message or from the
1.
profile data.
• The device checks if the notification message has data to play the tone. If data is available, it plays the
tone.
• If the notification message has no data for tone, the device checks the user profile for this information.
If the profile contains the tone information associated with NotifNoCall and the tone attribute is valid,
that tone is played.
• The tone selection information in the notification (message) takes precedence over the profile tone
selection information.
NOTE
LED: The LED flashes based on information from either the data within the notification message or from
2.
the user profile.
• The device checks the notification message for the visible indicator data. If data is available, the LED
flashes appropriately.
• If the notification message has no visible indicator data, the device checks the user profile. If the profile
contains the visible alert information associated with NotifNoCall, the corresponding LED flashes.
• The visible indicator selection information takes precedence over the profile visible indicator selection
information.
Vibrate: The device vibrates based on information from either the data within the notification message or
3.
from the user profile.
• The device checks if the notification message has data regarding the vibrate indicator. If data is
available, the device vibrates.
• If the notification message has no data for vibrate indicator, the device checks the user profile. If the
profile contains the vibrate alert information associated with NotifNoCall, the corresponding device
vibrates.
• The vibrate selection information takes precedence over the profile vibrate selection information.
•
NotifCallActive
This setting defines the alert behavior when receiving a notification message when on an active phone call.
• The behavior of the alerts is the same as that of NotiNoCall, except that the settings in the profile take
precedence over the message settings.
NOTE
•
AppAlertCallActive
When the device is running an application and an active call is in progress, this setting defines the receiving
a notification, alert behavior. The allowed values for tone, visible and vibrate indicators are boolean values
(whether or not the alerts are allowed in that state). If the tone, visible and/or vibrate indicator is allowed, the
behavior of these alerts follows the same rules as NotifCallActive.
• The device checks if any of the alerts' attributes (tone, visible, and vibrate) are enabled.
• If the alert attributes are enabled, the attribute behavior applicable for NotifCallActive apply. The
NotifCallActive attribute values appear in AppAlertCallActive (but are disabled).
If the tone selection information in the message does not exist on the device, the profile tone is
played
.
The alerts for this event functions only if the NotifAllowOnCallActive (refer to device config -
NotifAllowOnCallActive) is set to Yes
.