Motorola reserves the right to make changes to any software or product to improve reliability, function, or design. Motorola does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein.
Quick Reference Guide Introduction This document provides basic instructions for setting up, programming, and using the CS3000 series scanners. The scanner is available in the following configurations: • CS3000 - USB (batch), 0.5 GB Flash • CS3070 - USB (batch) and Bluetooth, 0.5 GB Flash Each scanner includes a USB host cable.
Symbol CS3070 3. Connect the other end of the host cable to a USB port on the host PC. Illustration to come Charging via Charging Cradle 1. Insert the cradle’s USB connector into a USB port on the host PC.
1. Press the scan button (+) to wake the scanner. 2. Press and hold the Bluetooth button (round button with Motorola logo) for five seconds. The scanner beeps and the Bluetooth button starts blinking quickly to indicate that the scanner is discoverable by the host.
Symbol CS3070 4. Select the CS3070 from the discovered device list. The Bluetooth application may prompt you to scan a passkey it generated, or for you to create and then scan a pin. 5. Scan Numeric Bar Codes on page 8...
Quick Reference Guide Bluetooth Communication Options To set up the scanner for communication with a host using standard Bluetooth profiles, scan one of the following bar codes. • - The scanner Serial Port Profile (Slave) connects to the host via Bluetooth and emulates a serial connection.
Symbol CS3070 Scanning To scan bar codes: 1. Aim the scanner at the bar code. 2. Press the scan (+) button. Illustration to come 3. Ensure the scan line crosses every bar and space of the symbol. RIGHT 012345 WRONG...
Quick Reference Guide Deleting Bar Codes In batch mode, to delete a bar code aim the scanner at the bar code and press the function ( - ) button. Note Bar codes cannot be deleted in Bluetooth mode. User Indications User Function Beeper...
Symbol CS3070 User Function Beeper Action Clear All Hold None None (with Delete function (-) and Clear All disabled) Connect Flashing None connection scanner to amber - to host host charging; solid green - charged Data Hold both None ->...
Quick Reference Guide Transmitting Bar Code Data to Host Transferring Data from a Batch Scanner The BarcodeFile.txt file within the \Scanned directory on the scanner stores Barcodes scanned bar code data. Connect the scanner to the host PC via USB host cable or the charging cradle and use Windows Explorer to navigate to the scanner.
This guide applies to the following Model Numbers: CS3070, CS3000. Wireless information applies to CS3070 only. All Motorola/Symbol devices are designed to be compliant with rules and regulations in locations they are sold and will be labeled as required. Local language translations are available at the following website: http://www.motorola.com/enterprisemobility/manuals...
Quick Reference Guide Health and Safety Recommendations Ergonomic Recommendations Caution: In order to avoid or minimize the potential risk of ergonomic injury follow the recommendations below. Consult with your local Health & Safety Manager to ensure that you are adhering to your company's safety programs to prevent employee injury.
Symbol CS3070 When driving a car, driving is your first responsibility - Give full attention to driving. Check the laws and regulations on the use of wireless devices in the areas where you drive. Always obey them. "The wireless industry reminds you to use your device / phone safely when driving".
The device complies with internationally recognized standards covering human exposure to electromagnetic fields from radio devices. For information on "International" human exposure to electromagnetic fields refer to the Motorola/Symbol Declaration of Conformity (DoC) at http://www2.symbol.com/doc/. Handheld Devices To comply with EU RF exposure requirements, this device must be operated in the hand with a minimum separation distance of 20cm or more from a person's body.
Scanner Labeling Illustration to come Power Supply Use only a Motorola/Symbol approved power supply output rated at 5 Vdc and minimum 0.85 A. The power supply shall be Listed to UL/CSA 60950-1; and certified to IEC60950-1 and EN60950-1 with SELV outputs. Use of alternative power supply will invalidate...
Quick Reference Guide Batteries Battery Information Motorola/Symbol rechargeable battery packs are designed and constructed to the highest standards within the industry. However, there are limitations to how long a battery can operate or be stored before needing replacement. Many factors affect the actual life cycle of a battery pack, such as heat, cold, harsh environmental conditions and severe drops.
• If you suspect damage to your equipment or battery, contact Motorola Enterprise Mobility support to arrange for inspection. Radio Frequency Interference Requirements- FCC Note: This equipment has been...
Italy requires a user license for outside usage. Statement of Compliance for CS3070 Wireless Devices Motorola/Symbol hereby, declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A Declaration of Conformity may be obtained from http://www2.symbol.com/doc/.
Latviešu: ES klientiem: visi produkti p c to kalpošanas m ža beig m ir j nog d atpaka Motorola otrreiz jai p rstr dei. Lai ieg tu inform ciju par produktu nog d šanu Motorola, l dzu, skatiet: http://www.motorola.com/recycling/weee.
Malti: G al klijenti fl-UE: il-prodotti kollha li jkunu waslu fl-a tal- ajja ta' l-u u tag hom, iridu ji u rritornati g and Motorola g ar-ri ikla . G al aktar tag rif dwar kif g andek tirritorna...
Holtsville, New York 11742, USA 1-800-927-9626 http://www.motorola.com/enterprisemobility MOTOROLA and the Stylized M Logo and Symbol and the Symbol logo are registered in the U.S. Patent and Trademark Office. All other product or service names are the property of their respective owners.