Staging Process For A Ca50 - Motorola CA50 Developer & User Manual

12 - 4 CA50/UCA Client & Server Developer & User Guide

Staging Process for a CA50

The following steps explain how to stage the CA50 so that it enables the MSP, allows universal conditions, contains
persistent network settings, relay server settings, UCA client settings and warm boot the device. Upon reboot the
UCAClient application launches since its UCA settings are stored in the registry.
Creating the Agent 30 settings definition
1.
•
In a Web browser, go to http://[server-ip]/msp.web to log in to an MSP server.
•
Select the Library tab.
•
Select the Settings tab.
•
Select the Create button.
•
Select the Agent.30.setting.xml.
•
Enter Enable30 for the name field.
•
Select the Next button.
•
Enter Enable 30 Agent in the description field.
•
Enter Enable30 for the name field.
•
Set the schedule interval to a time that is applicable to your environment. This time represents how often the
MSP agent checks for MSP downloads (MSP jobs). It is recommended to check in every 15 minutes.
•
Set the update discovery document interval (Force regDoc Uploads) to a time that is applicable to your
environment. It is suggested to set this to a value of 32 so that the discovery document is sent back to the
MSP server every 8 hours (32 * 15 minutes) if it changed.
•
Ensure the Enable30Agent field is set to TRUE.
•
Click the Finish.
•
If the MSP server version is earlier than 3.1.1, the settings definition file should be downloaded from:
http://support.symbol.com/support/product/softwaredownloads.do.
Creating the UCA settings definition
2.
•
In a Web browser, go to http://[server-ip]/msp.web to log in to an MSP server.
•
Select the Library tab.
•
Select the Settings tab.
•
Select the Create button.
•
Select the UCA.settings.xml.
•
Enter UCA Client Setup for the name field.
•
Enter UCA Client Setup in the description field.
•
Enter the server IP address of the UCA server UCA Client Setup.
•
Enter the store number in which the UCA server is installed.
•
Enter the desired SSL entry depending on whether or not SSL should be enabled or disabled.
•
Specify whether or not the SSL certificate errors should be ignored.
•
Enter the HTTP port when SSL is not used or use the default.