Starting The Mc92N0-G; Calibrating The Screen; Windows Devices; Android Devices - Motorola MC92N0-G User Manual

1 - 6 MC92N0-G User Guide

Starting the MC92N0-G

Press the red Power button to turn on the MC92N0-G. If the MC92N0-G does not power on, perform a cold boot.
See Resetting the MC92N0-G on page 2-24
for Android devices.
NOTE When a battery is fully inserted in a MC92N0-G for the first time, upon the MC92N0-G's first power up, the
device boots and powers on automatically.
When the MC92N0-G is powered on for the first time, it initializes its system. The splash screen appears for a short
period of time.

Calibrating the Screen

Windows Devices

To calibrate the screen so the cursor on the touch screen aligns with the tip of the stylus:
Using the stylus carefully press and briefly hold the tip of stylus on the center of each target that appears on the
1.
screen.
NOTE To re-calibrate the screen at anytime, press FUNC + ESC on the MC92N0-G to launch the calibration
screen application.
Repeat as the target moves around the screen or press ESC to cancel.
2.

Android Devices

To calibrate the screen so the cursor on the touch screen aligns with the tip of the stylus:
Touch > Display > Touch calibration.
Using the stylus carefully press and briefly hold the tip of stylus on the center of each target that appears on the
1.
screen.
Repeat as the target moves around the screen.
2.

Checking Battery Status

To check the charge level of the main battery or backup battery:
•
On Windows CE devices, tap Start > Settings > Control Panel > Power to display the Battery Status
window.
•
On Windows Embedded Handheld devices, tap Start > Settings > System > Power to display the Power
window.
•
On Android devices, touch
To save battery power, set the MC92N0-G to turn off after a specified number of minutes.
for Windows devices and
> About device > Status.
Resetting the Android Device on page 3-15