Charging Batteries; Charging The Battery In A Ca50; Charging Spare Batteries; Charging Temperature - Motorola CA50 Developer & User Manual

3 - 8 CA50/UCA Client & Server Developer & User Guide

Charging Batteries

Before using the CA50 for the first time, charge the battery using a cradle until the green charge status LED lights.
See Table 4-3 on page 4-10
device, see Appendix B,
NOTE The CA50 does not have an internal battery back up. If the battery is removed or replaced, the device cold
boots.
To charge batteries, use one of the following cradles:
•
Single-Slot CA50 Charging Cradle with Spare Battery Charger on page B-5
•
Eight-Slot Spare Battery Charger on page

Charging the Battery in a CA50

To charge the battery in a CA50:
Connect the charging accessory to the appropriate power source. See
1.
information.
Insert the CA50 into a cradle. The CA50 begins charging. The charge status LED is solid red while charging,
2.
then turns solid green when fully charged. See
For charging times, see

Charging Spare Batteries

Use one of the following accessories to charge a spare battery:
•
Single-Slot CA50 Charging Cradle with Spare Battery Charger on page B-5
•
Eight-Slot Spare Battery Charger on page
To charge a spare battery:
Connect the spare battery charging accessory to the appropriate power source.
1.
Insert the spare battery into the accessory spare battery charging slot with the charging contacts facing down,
2.
contacting the charging pins in the cradle.
The battery begins charging. The charge LED on the cradle lights to show the charge status.
For charging times, see

Charging Temperature

See Charging Temperature on page 3-7
for charge status indications. For information about the accessories available for the
Accessories.
B-8.
Average Charge Time on page
B-8.
Average Charge Time on page
for detailed information.
Appendix B, Accessories
Table 4-3 on page 4-10 for charging indications.
3-7.
3-7.
for setup