Validate Successful Server Installation And Proper Performance; Validate Proper Launch And Login To The Uca Server Web Console - Motorola CA50 Developer & User Manual

Validate Successful Server Installation and Proper Performance

This section describes how to verify the installation and configuration of the UCA server.

Validate Proper Launch and Login to the UCA Server Web Console

To login to the UCA server (see
Launch the UCA server Web Console by double clicking the Web Console for Server Setup and Maintenance
1.
icon on the server desktop.
Or
Launch the IE browser and point the browser to one of the following URLs:
• When logging in to the UCA server software locally, software is loaded on the computer being used and
the following URL is applicable:
http://localhost/Motorola/UCA/Client/DeviceManagement.asmx?op=DeviceRegistration
Or
• For remote login to the UCA server software, use the following URL and substitute the server IP address
into the portion of the <server IP address> URL shown below. For example replace <server IP address>
with 192.168.0.253 (use your relevant server IP address).
http://<server IP Address>/Motorola/UCA/Client/DeviceManagement.asmx?op=DeviceRegistration
Login to the UCA server and Web Console as the administrator (use the short cut ';UCA Server Web Console'
2.
on the desktop).
• Default Username: admin
• Default Password: admin.
IMPORTANT At the initial login to the Web Console (for details see
After a successful login, the System Status view of the UCA Web Console displays as shown in
a.
on page 9-4. This verifies that an administrator can login and view the status of the system.
IMPORTANT If the UCA Web Console does not display, the default Web page may be stopped. To start it do the
Login to the UCA Server System on page 9-3
Console administrator Username and Password:
•
Factory Default Web Console Username: admin
•
Factory Default Web Console Password: admin
It is strongly suggested that the default administrator Username and Password be changed after the
initial login.
Note that the Username and Password entered during the UCA server software installation process,
(step on page 6-13) are for SQL database access and should not be mistaken with the default Web
Console administrator Username and Password shown above.
following:
Go to Start > Control Panel > Administrative Tools > Internet Information Services (IIS) Manager.
Click on the + next to the computer name under Internet Information Services. Expand the folder
named Websites. If the default Web site is stopped, right click on it and select Start. Start the UCA
Web Console (see step 1 below).
UCA Server 6 - 45
for more information):
page 9-3), it is required to use the default Web
Figure 9-2