Motorola CA50 Developer & User Manual page 72

4 - 24 CA50/UCA Client & Server Developer & User Guide
CA Menu Options (Continued)
Table 4-6
Menu
UCA KeyCheck This application can be used to test the keys on the device.
To ensure all CA50 keys are functioning properly:
On the CA Menu, scroll to select Programs > UCA KeyCheck.
1.
The application executes and the KeyChk screen displays with the version and
2.
instructions for exiting the program.
To verify each key on the device is operating correctly, press the keys listed below to
3.
display the appropriate key data.
NOTE For each key press, three sets of information are displayed and the corresponding key code is in
the last two lines.
Example: For Walkie-Talkie key, the correct key code is 193, as shown below:
•
Press and release the Down arrow key - Key Down 40 and Key Up 40 displays.
•
Press and release the Up arrow key - Key Down 38 and Key Up 38 displays.
•
Press and release Scan/Select key - Key Down 13, WM_CHAR 13 and Key Up 13
displays.
•
Press and release left soft key - Key Down 37 and Key Up 37 displays.
•
Press and release right soft key - Key Down 39 and Key Up 39 displays.
•
Press and release the Volume Up key - Key Down 175 and Key Up 175 displays.
•
Press and release the Volume Down key - Key Down 174 and Key Up 174 displays.
•
Press and release the Mute key - Key Down 173 and Key Up 173 displays.
•
Press and release the side Application key - Key Down 194 and Key Up 194
displays.
•
Press and release the front Walkie-Talkie key - Key Down 193 and Key Up 193
displays.
To exit the application, press and release the left soft key three times.
4.
Description