Walkie-Talkie Functions - Motorola CA50 Developer & User Manual

4 - 32 CA50/UCA Client & Server Developer & User Guide

Walkie-Talkie Functions

Channel Settings
There are three walkie-talkie channel settings:
•
Listen/Talk Channel
• Users can listen and talk on Listen/Talk channels.
• A channel can be set to Listen/Talk by setting the type to 'T'; in the user profile under the
WTT > Chlist > Ch element.
• The default channel is also Listen/Talk. A default channel is the channel used in normal mode and it is the
channel that a user uses to talk. A channel can be set as a default channel by setting the type to 'Def' in
the WTT > Chlist > Ch element.
NOTE One Listen/Talk channel must be designated as the default channel for normal mode walkie-talkie
communications.
•
Listen Only Channel
• Users can listen to but cannot talk on Listen Only channels.
• Users cannot manually select and enter single channel mode on Listen Only channels.
• A channel can be set to listen only by setting the type to 'LO' in the WTT > Chlist > Ch element.
•
Accessible (Non-listen) Channel
• By default, users cannot hear anything on this channel. The channel is used as a reserve channel for
single channel mode.
• A user must select this channel manually to access this channel.
• Selecting this channel puts a user in Single Channel mode.
• When selected in Single Channel mode, users can talk and listen only on this channel.
• A channel can be set as Accessible (single channel only) by setting the type to 'SCO' in the
WTT > Chlist > Ch element.