Voice (Unicast) Call States - Motorola CA50 Developer & User Manual

Voice (Unicast) Call States

Voice (Unicast) Call States
Table 4-9
State
Busy Signal
10:52
Last name, First
Retry
End Call
10:52
Last name, First
0:01
Options
Mute On
10:52
Mute on
Last name, First
0:01
Options
Hold
10:52
Hold
Last name, First
0:01
Options
When caller receives a busy signal when the person called is on another voice
(unicast) call.
Caller ID and new soft key controls display:
•
Retry: redials extension
•
End: returns to prior phone book Item listing.
End
When a call ends when either party presses the right soft key to end the call, the
timer stops incrementing.
When the call ends the CA50 returns to the desktop or prior business
application screen (see
End
When the user presses the Mute (see
is muted. While muted, the call timer continues uninterrupted. Mute is in place
until the user presses Mute again, or the call ends. The mute state does not
carry across separate calls. By default, mute is off at the start of a voice
(unicast) call. During a voice (unicast) call, Mute is a toggle switch, muting and
unmuting the microphone for the duration of a single call. See
End
Incoming Voice (Unicast) on page 4-55
(unicast) call while in a business application.
When a user selects the hold option while on an active call, the call is placed on
hold. While on hold, the call timer continues uninterrupted. See
Incoming Voice (Unicast) on page 4-55
(unicast) call while in a business application.
Press the left soft key to display Options:
Call
End
Unhold
Transfer
•
Select Unhold/Hold to place the call off and on hold and return to the
active call screen.
•
Select Transfer to transfer a call to another party (see
on page
Description
Sample Business Application on page
Mute Key on page
Back
4-46).
CA50 Modes of Operation 4 - 53
4-54).
4-7), the microphone
Answering an
for information about receiving a voice
Answering an
for information about receiving a voice
Transferring a Call