Operating Walkie-Talkie - Motorola CA50 Developer & User Manual

4 - 34 CA50/UCA Client & Server Developer & User Guide

Operating Walkie-Talkie

Initiating Walkie-Talkie Communication
The user can initiate walkie-talkie communication on any screen when not in a voice (unicast) call or in Do not
disturb mode.
Press and hold the Walkie-Talkie key (see
1.
A short walkie-talkie start tone sounds.
2.
Begin speaking into the microphone.
3.
To end the call, release the Walkie-Talkie key.
4.
Receiving Walkie-Talkie Communication
The user can receive walkie-talkie communication on any screen except when on a voice (unicast) call or in Do not
disturb mode.
A start tone sounds on the device when the device detects incoming walkie-talkie communication and a message
plays through the speaker. To respond, the user presses the Walkie-Talkie key and speaks through the
microphone on the device.
Changing the Transmit Channel Using the CA50 Menu
The CA50 desktop displays the default transmit channel. To change the channel, users can access the
walkie-talkie channel menu directly from a business application, or the desktop.
Default Transmit
Channel
2 10:56
Admin
Channel 2
Floor
Menu Phn bk
CA50 Desktop
Figure 4-13
To change the transmit channel:
On the CA50 desktop
1.
Menu Menu
Applications
WT channels
Key lock
Back
Desktop Menu
Figure 4-14
CA50 - Front/Back Views on page
(Figure 4-13), press the left soft key to display the Desktop menu.
3-2).