Parking A Call - Motorola CA50 Developer & User Manual

Press the Up or Down keys to scroll to the appropriate extension and press Select to transfer the call.
6.
Trsf
Call
transfered
Ok
Call Transferred Display
Figure 4-31
When the call is transferred to the selected extension, it appears on the target device as an incoming voice
7.
(unicast) call.
Press the right soft key (Ok) to return to the desktop or to the prior business application screen.
8.
NOTE When the device detects no user activity after 3 seconds, the device defaults to an Ok right soft key press
and returns to the desktop, or the prior business application screen.

Parking a Call

When the CA50 receives a voice (unicast) call, the call can be parked for retrieval by another CA50 device.
There are two Call Park options:
•
Parking the call on any available extension allowing the user to pick up the call.
•
Parking the call on an available extension within a group and/or department allowing the user to pick up the
call.
NOTE The options above are available only if they are enabled on the UCA server. The system variable
corresponding to this setting is Phone.Gateway.CallPark.ByGroup.Enable. See
6-48
for more information. Call park is available only in PBX mode.
Parking a Call on any Available Extension
To park a voice (unicast) call on any available extension:
On the Active Call window press the left soft key (Options) to display the Call Options menu.
1.
10:52
Abruzzo, R
0:01
Options End
Active Call Display
Figure 4-32
On the Call Options menu press the Up or Down keys to scroll to Park and press Select.
2.
Cal l
Transfer
Hold
Park
Back
Call Options Display
Figure 4-33
CA50 Modes of Operation 4 - 47
Table 6-2 on page