Appendix D Deployment Example - UCA
Server Install & Basic User Setup
Overview
This deployment example is a step-by-step exercise that takes a developer through the installation of a UCA
server, its configuration and the deployment of CA50s, in addition to the topics listed below:
•
Installing and configuring UCA server production version software
•
Setting up the CA50 device
•
Generating Rapid Deployment bar codes using MSP software
•
Creating an XML profile from UCA Profile Builder (which configures the device when it is loaded from the
UCA server to the CA50 device)
•
Populating UCA server files and databases with site/user specific information
•
Generating an employee login bar code
•
Deploying a CA50
•
Logging an employee into the UCA server.
Upon completing this exercise, the user can use the CA50 to communicate via voice calls and walkie-talkie
communication.
This exercise does not enable price lookup. For a self contained pre-built demo that enables price lookup, voice
calls and walkie-talkie communication, see
NOTE
1. For a complete checklist outlining all the development and deployment activities required to implement
a CA50 solution, see the
2. For a table listing the most commonly requested topics within this manual, see the Quick Startup Guide
on the last page of the manual.
Appendix E, Self Contained Pre-Built
Development and Deployment Checklist on page
Demo.
2-1.