Motorola CA50 Developer & User Manual page 220

8 - 20 CA50/UCA Client & Server Developer & User Guide
whether the alerts are allowed or not in that state. If the tone, visible and/or vibrate indicator is allowed, the
behavior of these alerts follows the same rules as that of NotifCallActive.
The device checks if the alerts attributes (tone, visible, and vibrate) are enabled.
If the alert attributes are enabled, the attribute behavior applicable for NotifCallActive will apply.
AppAlertCallActive
Figure 8-25
AppAlertCallActive alert has three configurable options:
•
Allow Tone - Check box to activate tone
•
Blink LED - Check box to display visible indicator
•
Vibrate - Check box activate vibrate indicator
NOTE Attributes defined for NotifNoCall, NotifCallActive, and AppAlertCallActive apply only when the client setting
Enable Notification is set to Yes. If this attribute is set to No, the notification is not sent to the device and
none of the attributes defined for notification will apply.