Status Indications - Motorola RS507 Quick Reference Manual

Quick Reference Guide

Status Indications

The Imager has two Scan LEDs that provide identical indications. The Imager is
also equipped with a beeper that generates sound indications in variable tones.
NOTE In the corded configuration, beep indications are emitted only from the
connected terminal.
No. LED
1. None
2. Short green
flashes
3. None
4. None
5. None
6. None
7. None
8. One green
flash
9. None
10 Red flash
11 Long red
flash
followed by
a green
flash
Beep Indication
High/low
None
Low/high
High/low
high/low/high/low
Long low/
long high/
Long low/
long high/
Long low/
long high/
High
4 long beeps
2 short beeps
High/low
High/low
Description
Bluetooth communication is
disconnected.
Attempting to connect over
Bluetooth.
Imager is connected over
Bluetooth.
Bluetooth communication is
disconnected - Imager is out of
range.
Properly decoded scan of
Bluetooth pairing bar code.
Bluetooth connection attempt
failed.
Bluetooth connection attempt is
rejected.
Proper scanning indication.
No Bluetooth communication after
reconnection failure.
Low battery.
Clean boot was performed
successfully.
11