Client Settings - Motorola CA50 Developer & User Manual

Device Settings (Continued)
Table 8-7
Field
Notif Msg Visible Cycle Count
Enable Backlight
Backlight On Key Press
Enable Beep On Low Battery
Enable Backlight On Notif Msg
AEC For Headset
Battery Beep Interval
Default Low Battery Wav File

Client Settings

Use the Client Settings to set the clock and configure other operational parameters (such as timeouts).
Client Settings
Figure 8-18
Client Settings
Table 8-8
Field
Time Format
Menu Timeout
Pop Error Timeout
Silent Mode Timeout
The number of times the device should show visible indication on receipt of notification
message.
Check the check box to enable the device backlight on the device. Uncheck the check
box to disable the backlight on the device (when on battery power) regardless of the
values of other parameters such as Enable Backlight On Key Press.
Check the check box to turn the device backlight on when a key is pressed (on battery
power).
Check the check box to enable the beep when the battery is low function.
Check the check box to enable the backlight when a notification is delivered.
Check this box to enable echo cancellation for the headset mode. By default echo
cancellation is disabled. This parameter is applied only to the headset mode and it is
enabled for the handset at all the times.
Sets the time interval (seconds) between beeps when the battery is low.
Sound file that plays when the battery goes below the threshold level.
Select time format from the drop-down list (the time format displayed on the device).
The amount of time in seconds that a menu displays (without a key press).
The amount of time in seconds an error message displays.
The amount of time in seconds that the UCA client application mutes after pressing Mute.
XML Profile Builder for Device Configuration 8 - 15
Description
Description