Motorola CA50 Developer & User Manual page 525

Commands Usage in Notification Messages
Table J-3
Command Name
SETSCANMODE
SETCHANNEL
SETRING
PHNPLACECALL
PHONEHANGUP
PHONEHOLD
PHONERESUME
PHNTRANSFERCALL
PHONEMUTE
QUIETMODE
POWEROFF
REBOOT
ABOUT
SETBKLTLVL
SETBKLTTIMEOUT
Description
Set walkie-talkie into Scan mode.
See Device Modes on page 4-33
for more information about WT
channels and modes.
Set a particular walkie-talkie
channel.
See Device Modes on page 4-33
for more information about WT
channels and modes.
Set a ring type.
Place a phone call to the given IP. Call:S:L:PHNPLACECALL:1:192.168.7.126:5060:
Hang up an active call.
Put an active call on hold.
Resume a call on hold.
Transfer an active phone call to
some other device/user.
Mute an active call.
Put the device on Do not disturb
mode. See Device Modes on
page 4-33 for details about WT
channels and modes.
Power off the device.
Reboot - Cold boot the device.
Display UCAClient About screen.
Set backlight level
Set backlight timeout value.
Commands and Uses J - 15
Usage with Left and Right Soft Keys
WTScan:S:L:SETSCANMODE
SetCh:S:L:SetChannel:3:Normal
SetRing:S:L:SetRing:\Application\Wav\laser.wav
HangUp:S:L:PHONEHANGUP
Hold:S:L:PHONEHOLD
UnHold:S:L:PHONERESUME
Transfer:S:L:PHNTRANSFERCALL:1:192.168.7.75:5060:
Mute:S:L:PHONEMUTE
SetDND:S:L:QUIETMODE:Y
PowerOff:S:L:POWEROFF
Reboot:S:L:REBOOT
About:S:L:About
SetBkLT:S:L:SetBkltLvl:0
BkLTTime:S:L:SetBkltTimeout:2
Note: 0 means backlight is always on.