Motorola CA50 Developer & User Manual page 353

Staging and Deploying CA50s 12 - 3
The HTTPSPort entry is the port that is used for the WebService or Web server communication when SSL is
enabled. This entry resides in UCAPlugInPersist.reg.
The LogOffService entry contains the name of the Web service that provides the "Log Off" operation. This name
should not change but a new value can be stored here if for any reason the Web service name changes for the Log
Off operation. This Web service operation is used when the CA50 client application is informed to log off the user.
This entry resides in UCAPlugInPersist.reg.
The NewExtensionService entry contains the name of the Web service that provides the "request new phone
extension" operation. This name should not change but a new value can be stored here if for any reason the Web
Service name changes for the "request new phone extension" operation. This Web Service operation is used by
the CA50 client application when it is necessary to obtain a new phone extension. This entry resides in
UCAPlugInPersist.reg.
The SessionCheckService entry contains the name of the Web service that provides the "client checks in with UCA
server (ServerCheckIn)" operation. This name should not change but a new value can be stored here if for any
reason the Web service name changes for the "ServerCheckIn" operation. The CA50 client application checks in
with the UCA server if it is determined that the CA50 device went out of range and then back in range. This entry
resides in UCAPlugInPersist.reg.
The ServerIP entry contains the IP address of the UCA server. This entry resides in UCAPlugInPersist.reg.
The StoreID entry contains the store number of the store and is associated with the CA50 device. This entry
resides in UCAPlugInPersist.reg.
Note that there are other UCAClient application registry definitions that are not necessary to stage that reside in
UCAClient.reg. These settings can be changed manually or via a package that can be downloaded when deemed
necessary. The additional settings are as follows.
The LoggingEnabled entry allows a yes or no toggle for logging. A value of 1 means logging is on. A value of 0
means logging is off. If logging is on, the DebugLevel keys allow more control of what gets logged at the
component level. The higher the log level, the more log messages get printed out. These entries reside in
UCAClient.reg.
The WebServiceResponseTimeout entry informs the CA50 client application how long to wait for a response from
the server in seconds when attempting to make a Web Service call. The WebSericeTimeBeforeWarning is the
amount of time to wait before displaying its Waiting For Server screen when waiting for a response from a Web
service call. This entry resides in UCAClient.reg.
The WebSericeTimeBeforeWarning is the amount of time to wait before displaying its Waiting For Server or
Waiting for Web Server screen when waiting for a response from a Web service call or Web server, respectfully.
This entry resides in UCAClient.reg.
The LocalProfileFile entry is used if a profile is created and stored on the device so that the CA50 client application
can run without a UCA server. However, the profile would have to be specifically made to run without the UCA
server. This may be useful if the user only wishes to use the walkie-talkie and business applications. This entry
resides in UCAClient.reg.
The LogFileLocation entry is used to inform the CA50 client application where to write the log file if logging is
enabled. This entry resides in UCAClient.reg.
The language entry informs the CA50 client application which language the strings on the UCA client are to be
shown.The supported languages are English, French, Italian, German and Spanish.The language entry resides in
the UCAClient.reg. Please ensure that the languages selected from MSP for the client and sever (selected during
the installation from install shield) match.