User Preference Settings; Parameter Bar Code Scanning; Beep After Good Decode - Motorola CS4070 Manual

User Preference Settings

Parameter Bar Code Scanning

Parameter # 236
To disable the decoding of parameter bar codes, including the Set Defaults parameter bar codes, scan the
Disable Parameter Scanning bar code below. To enable decoding of parameter bar codes, scan Enable
Parameter Scanning.
*
Enable Parameter Bar Code Scanning

Beep After Good Decode

Parameter # 56
Scan a bar code below to select whether or not the scanner beeps after a good decode. If selecting Do Not
Beep After Good Decode, the beeper still operates during parameter menu scanning and to indicate error
conditions.
*
Beep After Good Decode (Enable)
(1)
(1)
User Preferences 3 - 11
Disable Parameter Bar Code Scanning
(0)
Do Not Beep After Good Decode (Disable)
(0)