11. Removing The Stripper Unit - Riso V8000 Series Technical Manual

CHAPTER 4. FIRST PAPER FEED SECTION

11. Removing the Stripper Unit

(1) Lower the paper-feed tray to the lower-limit position, and turn OFF the machine power.
(2) Place your finger on the top of the stripper unit and pull forward to unhook the unit.
(3) Unplug the connector of the multiple feed switch, and remove the stripper unit.
[Precautions on Reassembly]
• Insert the stripper unit onto the paper-guide plate while pressing the stripper pad ass'y down.
• Adjust the stripper angle and pressure if necessary.
• Adjust the Multiple Feed Switch position if necessary.
S0429
Connector of the Multipe
Feed Switch
Paper-guide plate
Stripper-pad ass'y
Stripper unit
[4 - 18]
Hold here and
pull forward