Removing The Paper Feed Tray Unit - Riso V8000 Series Technical Manual

CHAPTER 4. FIRST PAPER FEED SECTION
5.

Removing the Paper Feed Tray Unit

(1) Completely lower the paper feed tray.
(2) Remove the wire harness cover (white plastic plate). (Two M4 x 8 screws)
(3) Detach the reuse band on the paper feed tray wire harness, disconnect the connector, and remove
the ground wire retaining screw (M4 x 8).
(4) Remove the feed tray lock plate on both sides. (One M3 x 6 screw on each side)
(5) Remove the paper feed tray unit.
Paper feed tray
Wire cover
Feed tray lock plate
P0411
[4 - 10]
P0410
Reuse band
Ground lead
P0412
P0413