Riso V8000 Series Technical Manual page 235

Original read roller 2
(13) Remove plastic lock ring from rear of the original read roller-2 shaft, and then remove the timing
pulley together with parallel pin.
(14) Remove E-ring and detach the metal bushing.
(15) Remove plastic lock ring from front of the original read roller-2 shaft and detach the metal bushing.
(16) Detach the original read roller-2.
< REAR >
< REAR >
Plastic lock ring Parallel pin
Timing pulley
Timing pulley
Original read roller-2
Plastic lock ring
P1331
Original read roller-2
Metal bushing
E-ring
[13 - 17]
CHAPTER 13. AF SCANNING SECTION
Original read roller-2
Plastic lock ring
Metal bushing
P1332
< FRONT >
< FRONT >
P1333
Plastic lock ring