Process/Scanning Test Mode - Riso V8000 Series Technical Manual

4.

Process/Scanning Test Mode

No.
100 Image Scanner AF Shading Sensor
101 Flat Bed Original Det. Sensor
110 Stage Cover Sensor
No.
130 Image Scanner Lamps ON
131 FB Backlight
No.
150 Shading Operation
151 Scanner Home Action
152 Scanner Cycle Action
153 Scanner AF Action
154 Scanner Lock Action
155 Scanner Release Action
No.
No.
180 FB Horizontal Scan Position Adjus t
Des cription
Setting
181 FB Scan Start Position Adjus t
Des cription
Setting
182 FB Scanning Speed Adjustm ent
Des cription
Setting
183 Line-copy Slice Level Adjustm ent
Des cription
Setting
Sensors, switches
Motors, solenoids
Runs the shading operation.
Returns the scanner to the home position.
Performs one scanner operation cycle. (A3 scanning)
* Adjusts the speed according to the reproduction size in Test mode No. 187.
Moves the scanner to the AF scanning position.
Moves the scanner to the lock position for transporting.
* Set the machine to display the error T23.
Cancels the error status set in Test mode No. 154.
Data check
Adjusts the original horizontal scan pos ition on the flat bed.
-30 to +30 (-3.0 m m to +3.0 m m ) relative to datum
Range:
* (+ is to rear)
5 (0.5 m m )
Units :
0 m m
Default:
Adjusts the original s canning s tart position on the flat bed.
Range:
-60 to +60 (-6.0 m m to +6.0 m m ) relative to datum
* (+ is downward)
Units :
1 (0.1 m m )
Default:
0 m m
Adjusts the original s canning s peed on the flat bed.
-100 to +100 (-10.0% to +10.0%) relative to datum
Range:
* (+ shrinks )
1 (0.1%)
Units :
0%
Default:
Sets the slice level for text m ode. Larger values for lighter print.
-16 to +16
Range:
1
Units :
2
Default:
CHAPTER 17. TEST MODE
PROCESS/SCANNING TEST MODE
Carriage at home position
Open (original present)
Original cover is open
Original scanning light source
Original alignment light source
Unit check
Data settings
[17 - 7]
Detection status
Remarks
Display details