Riso V8000 Series Technical Manual page 152

CHAPTER 8. PRINT DRUM SECTION
(15) Detach ink shaft drive plate by removing screw (M4x8), and remove metal bearing with flange, spur
gear, and then pull out the ink drive shaft.
* Do not misplace the metal bearing between the spur gear and the O-ring.
Metal bearing with flange
Ink drive shaft plate
Metal bearing
P08062
P08060
Spur gear
O-ring
Ink drive collar
Ink drive shaft
Metal bearing
Ink drive shaft
[8 - 26]
P08061
P08063
P08064