CHAPTER 7. PAPER EJECTION SECTION
10. Removing the Pinch Slide Ass'y
(1) Remove the paper ejection pinch unit.
(2) Remove the pinch cover. (Six M4 x 8 screws)
(3) Detach the pinch release springs (front and rear) and disconnect the connectors to the motor and
sensor at the front and rear. Slide up the pinch slide ass'y and remove from the pinch base ass'y .
Pinch cover
P0715
Pinch release springs
Connectors
Connectors
P0717
P0716
Slide up and remove
Pinch slide ass'y
P0718
Pinch base ass'y
[7 - 9]