Riso V8000 Series Technical Manual page 153

(16) Detach inner pressure roller springs (one each on FRONT and REAR) and remove mounting screw
(M4x8) on each side. Detach pin C on the inner pressure roller unit from the slot in the inner
pressure roller support plate and remove the inner pressure roller unit.
<Refer to page No. 8-28 for the assembly instructions>
Inner pressure roller
support plate
Pin C
Inner pressure roller
spring
Mounting screw
CHAPTER 8. PRINT DRUM SECTION
< REAR >
< FRONT >
Inner pressure roller unit
[8 - 27]
Inner pressure roller spring
Mounting screw
P08065
Inner pressure roller
support plate
Pin C
P08066
P08067