Riso V8000 Series Technical Manual page 304

No.
070 System Parameter Adjust Record
SW Action Record
071
072 Error Record
073 Maintenance Count
Current Battery Voltage
074
Optional Configuration Check
078
No.
080 Clear Error Status Data
Forcibly clears the jam.
This test mode can also be used to clear error data for items for which T errors
Description can otherwise be cleared only by Technicians.
Consumable errors cannot be cleared.
This is the same mode with power ON pressing reset key.
Setting None
081 Clear User Memory
Resets test mode data settings and settings other than those for machine
codes, drum codes, and ink codes (user settings, administrator settings) to
Description
default values.
* Always save data before resetting.
Setting None
082 Clear Test Mode Data Setup
Resets all settings set in normal test modes to default values.
Description
* Cannot be selected from menu screen of the test mode.
* Always save data before resetting.
Setting None
083 Maintenance-Master Count Entry
Sets the number of masters at which the maintenance call message is
Description
displayed.
Range:
Setting Units:
Default:
084 Maintenance-Copy Count Entry
Sets the number of main unit prints at which the maintenance call message is
Description
displayed.
Range:
Setting Units:
Default:
085 Maintenance-Drum Meter Entry
Sets the number of print-drum prints at which the maintenance call message
Description
is displayed for the drum currently installed. (Set for each print drum.)
Range:
Setting Units:
Default:
Data check
Data settings
0 to 9999 (*100)
1 (*100)
0
0 to 9999 (*1000)
1 (*1000)
0
0 to 9999 (*1000)
1 (*1000)
0
[17 - 5]
CHAPTER 17. TEST MODE
SYSTEM/CNTRL PANEL TEST MODE
Display details
Lists Test mode No. and setting for non-default
items during data setting.
Displays error code (D**-***) for set switch that
caused operation to stop. (Most recent 8 items)
Lists error codes for errors occurring recently in
normal mode. (Most recent 8 codes)
Displays all maintenance counter values. (Master,
printing, drum 1, drum 2)
Displays current battery capacity for ROSE and
MCTL as A/D value and voltage.
A/D value: 0 to 255 (full at 255)
Voltage: 0 to 3.3 V (displays x10 values)
Displays optional peripherals/devices currently
connected. Displays the version number if the
device contains ROM.
1/2 Switch
O