Riso V8000 Series Technical Manual page 327

CHAPTER 17. TEST MODE
ACCESSORIES 1 TEST MODE
No.
772 Storage Mem ory Card Data
Storage Mem ory Properties
773
No.
780 AF Scan Mirror Pos ition Adjust
Des cription
Setting
781 AF Base Mirror Pos ition Adjust
Des cription
Setting
782 AF Hrzntal Scan Position Adjust
Des cription
Setting
783 AF Scan Start Position Adjust
Des cription
Setting
784 AF Scanning Speed Adjustm ent
Des cription
Setting
Data check
Displays details for the m em ory card inserted into the slot.
* Download cards s hould be ins erted after switching on power,
s ince downloading begins when power is switched on.
* Dis play details
0:
1:
2:
3:
4:
255: Other card
* Status can be selected for storage m em ory card slots 1/2.
* Select 1 or 2 using the Print drum 1/2 selector button. (The slot
on the PCB s ide is slot 1
== Spare (function not available) ==
Dis plays the volum e label, capacity, volum e us ed, and available
capacity for storage m em ory.
* Only one storage m em ory card to be checked should be ins erted
into the slot.
* Two m em ory cards cannot be checked sim ultane
Adjusts the stop position of the m irror (carriage) during AF s canning.
-20 to +20 (-2.0 m m to +2.0 m m )
Range:
*(+ is downward)
1 (0.1 m m )
Units :
0 (0 m m )
Default:
Adjusts the stop position of the m irror (carriage) during AF-ABC.
Range: 0 to 30 (0 m m to 3.0 m m )
*(+ is upward)
Units : 1 (0.1 m m )
Default: 0 (0 m m )
Adjusts the horizontal pos ition when scanning the original us ing the AF. Set s eparately
from flat bed.
-35 to +40 (-3.5 m m to +4.0 m m )
Range:
*(+ is rear)
5 (0.5 m m )
Units :
0 (0 m m )
Default:
Adjusts the scan start pos ition when s canning the original us ing the AF.
Range: -60 to +60 (-6.0 m m to +6.0 m m )
*(+ is downward)
Units : 1 (0.1 m m )
Default: 0 (0 m m )
Adjusts the scanning s peed when s canning the original using the AF. (Adjusts the AF
read pulse m otor s peed.)
Range: -50 to +50 (-5.0% to +5.0%)
*(+ shrinks)
Units : 1 (0.1%)
Default: 0 (0%)
Dis play details
No card
ROSE download
MCTL PCB download
Function upgrade
Storage m em ory (ATA card)
Data settings
[17 - 28]