Removing The Stage Glass - Riso V8000 Series Technical Manual

2.

Removing the Stage Glass

(1) Remove following five covers from the scanner unit.
- Scanner table cover
- Scanner cover (right)
- Scanner cover (rear)
- Scanner cover (left)
- Scanner cover (front).
(2) Remove the two special stepped screws and remove the original stopper. (The original stopper is
engaged from underneath. Move it toward the paper-feed side before removing it upward.)
(3) Remove the stage glass.
Original stopper
CHAPTER 12. FB ORIGINAL SCANNING SECTION
Stage glass
[12 - 9]
P1209