Removing The Pinion; Checking The Pinion; Checking The Armature - Yamaha e60hmhd Service Manual

STARTER MOTOR

REMOVING THE PINION

Remove:
• Clip 1
NOTE:
Using a pry-bar, pry off the clip.

CHECKING THE PINION

1. Check:
• Pinion teeth
Wear/damage
2. Check:
• Clutch movement
Damage
NOTE:
Rotate the pinion clockwise, and check that it
is free. Also try to rotate the pinion
counterclockwise and confirm that it locks.

CHECKING THE ARMATURE

1. Check:
• Commutator
Dirty Clean with #600 abrasive paper.
2. Measure:
• Commutator diameter
Out of specification
Commutator diameter limit:
29.0 mm (1.14 in)
8-19
Replace.
Replace.
Replace
E