Starting System Checks; Checking The Fuse; Checking The Neutral Switch - Yamaha e60hmhd Service Manual

STARTING SYSTEM
CHECKING THE BATTERY
Refer to the "CHECKING THE BATTERY" on
page 3-23

CHECKING THE FUSE

Check:
• Fuse continuity
No continuity
• Fuse
Brown Replace.
Fuse rating:
12 V - 10 A
CHECKING THE WIRE HARNESS
CONTINUITY
Check:
• Wire harness continuity
No continuity
CHECKING THE WIRE CONNECTIONS
Check:
• Wire connections
Poor connection
CHECKING THE MAIN SWITCH
Refer to the "IGNITION CONTROL SYSTEM"
on page 8-11
CHECKING THE ENGINE STOP SWITCH
Refer to the "IGNITION CONTROL SYSTEM"
on page 8-11

CHECKING THE NEUTRAL SWITCH

Check:
• Neutral switch continuity
Out of specification
Length
Push 18.5 - 19.5 mm
a
(0.73 - 0.77 in)
Push 19.5 - 20.5 mm
b
(0.77 - 0.81 in)
8-15
E
Replace.
Replace.
Properly connect.
Replace.
Leads color
Brown Brown