Propshaft Service; Front Propshaft Removal (Rzr Xp) - Polaris xp 2013 eps Service Manual

PROPSHAFT SERVICE

Front Propshaft Removal (RZR XP)

1. Remove both seats and engine service panel.
2. Remove the gear selector knob and center console.
Cap
Screws
Torx Screws
3. Locate the propshaft roll pin and use the Roll Pin
Removal Tool (PN 2872608) to remove the roll pin.
Discard roll pin.
Roll Pin Removal Tool:
PN 2872608
NOTE: Right front wheel can be removed to gain
better access to the propshaft roll pin.
4. Remove the (4) bolts retaining the front gearcase.
5. Carefully move the gearcase forward to remove the
front propshaft from the gearcase input shaft.
Torx Screw
Torx Screws
9924096 - 2013 RANGER RZR XP 900 / RZR XP 4 900 Service Manual
© Copyright 2012 Polaris Sales Inc.
6. Slide the front propshaft off the rear propshaft and
remove it from the vehicle.
Rear
Shaft
7. Proceed to "Front Propshaft Installation".
FINAL DRIVE
Front
Shaft
7
7.9