Polaris xp 2013 eps Service Manual page 323

4. Install the lower shock mounting bolt and new nut.
Torque fastener to specification.
Lower Shock Bolt to Trailing Arm:
70 ft-lbs (95 Nm)
5. Install the stabilizer bar mounting bolt, washer and
new nut. Torque fastener to specification.
Stabilizer Bar Linkage:
31-34 ft-lbs (42-46 Nm)
6. Apply Anti-Seize to drive shaft axle splines.
7. Install rear wheel hub assembly. Install the (2) cone
washers and castle nut. Torque castle nut to
specification. Install new cotter pin.
Cone Washers
Wheel
Hub
80 ft-lbs
(108 Nm)
Rear Wheel Hub Castle Nut:
80 ft-lbs (108 Nm)
= T
= T
Out
NEW Cotter Pin
= T
9924096 - 2013 RANGER RZR XP 900 / RZR XP 4 900 Service Manual
© Copyright 2012 Polaris Sales Inc.
8. Install the radius rod bolts, washers and new nuts.
Torque fasteners to specification.
Radius Rods to Bearing Carrier:
45 ft-lbs (61 Nm)
9. Install the rear brake caliper assembly and new bolts.
Torque to specification.
40 ft-lbs
(54 Nm)
RZR XP Shown
Rear Caliper Mounting Bolts:
40 ft-lbs (54 Nm)
10. Install wheel and (4) wheel nuts. Torque wheel nuts
to specification.
Wheel Nuts:
30 ft-lbs (41 Nm) + 90° (1/4 turn)
FINAL DRIVE
= T
= T
= T
7.33
7