Shock Compression Adjustment - Polaris xp 2013 eps Service Manual

Shock Compression Adjustment

The compression damping adjustment is located on top of
the shock 'Piggyback' reservoir of each shock.
Turn the clicker adjuster knob to make damping
adjustments.
NOTE: When clicker adjuster is turned clockwise
until it stops, damping is in the fully closed position.
Turn the clicker clockwise to increase compression
damping. Turn the clicker counter-clockwise to decrease
compression damping.
NOTE: The factory setting is 10 clicks from closed.
Refer to the "Compression Adjustment Table".
Increase
Damping
Clicker
Adjuster
Compression Adjustment Table
Setting Compression Damping
Softest Full counter-clockwise position
Factory
Firmest
Decrease
Damping
10 clicks from closed
2 clicks from closed
9924096 - 2013 RANGER RZR XP 900 / RZR XP 4 900 Service Manual
© Copyright 2012 Polaris Sales Inc.
MAINTENANCE
2.41
2