Cps Replacement - Polaris xp 2013 eps Service Manual

CPS Replacement

1. If not done already; disconnect the CPS harness
connector (see "CPS Test").
2. Using an 8mm socket, remove the CPS retaining bolt
(A) and remove the sensor (B) from the stator cover.
C
3. Unclip the wire harness retainer (C) and remove the
CPS harness from the retainer to allow replacement.
4. Install new sensor using a light coating of oil on the
O-ring to aid installation.
5. Torque the CPS retaining bolt to specification.
CPS Retaining Bolt:
106 in-lbs (12 Nm)
A
B
= T
9924096 - 2013 RANGER RZR XP 900 / RZR XP 4 900 Service Manual
© Copyright 2012 Polaris Sales Inc.
ELECTRONIC FUEL INJECTION
4
4.19