Engine Disassembly / Inspection - Top End; Valve Cover Removal; Camshaft Removal - Polaris xp 2013 eps Service Manual

ENGINE / COOLING

ENGINE DISASSEMBLY / INSPECTION - TOP END

Valve Cover Removal

NOTE: The valve cover can be removed with the
engine installed in the chassis.
1. Remove the (4) valve cover shoulder bolts (A) and
isolators (B) using a T40 driver.
2. Replace isolators (B) and valve cover seal (C) if oil
leaks are evident.
3. Remove the spark plugs (D). Stuff spark plug holes
with shop towels to prevent anything from falling into
the combustion chamber.
3.32
D
A
B
C
9924096 - 2013 RANGER RZR XP 900 / RZR XP 4 900 Service Manual
© Copyright 2012 Polaris Sales Inc.

Camshaft Removal

NOTE: The camshafts can be removed with the
engine installed in the chassis.
1. Rotate the engine so the PTO cylinder is at Top Dead
Center (TDC) to relieve most of the valve spring
pressure. The camshaft lobes should face out and
the slots on the end of the camshafts should line up.
Lobes should face out
2. Remove the hydraulic cam chain tensioner (E) from
the cylinder. Replace the sealing washer (F) upon
reassembly.
E
F