Rocker Panels, Console And Floor - Polaris xp 2013 eps Service Manual

BODY / STEERING / SUSPENSION
11. Disconnect the cargo box tail light harness (I) located
above the LH resonator box support bracket.
I
12. Slide back the hose clamp (J) and remove the engine
breather hose (K) from the crankcase.
13. With the aid of an assistant, carefully lift and guide the
cargo box assembly up and off the vehicle frame.
Make note of wire and hose routings for reassembly.
5.24
K
J
9924096 - 2013 RANGER RZR XP 900 / RZR XP 4 900 Service Manual
© Copyright 2012 Polaris Sales Inc.

Rocker Panels, Console and Floor

Rocker Panel Removal
1. Remove the push rivets and Torx screws retaining
the rocker panel and remove panel from the vehicle.
RZR XP Shown
Console and Lower Floor Removal (RZR XP)
1. Remove both seats and rocker panels (see "Rocker
Panel Removal").
2. Remove the T27 screws retaining the console to the
floor.
3. Remove shift handle knob and remove the console.
4. Remove the Torx screws retaining the upper floor to
the lower floor.
5. Remove the Torx screws retaining the rear portion of
the floor and remove the lower floor from the vehicle.