Body Component Removal; Seats / Engine Service Panel; Front / Rear Bumper - Polaris xp 2013 eps Service Manual

BODY COMPONENT REMOVAL

Seats
1. To remove any of the seats, lift upward on the latch
lever located behind the seat bottom.
2. Lift upward and forward on the seat while lifting up on
the latch lever and remove the seat from the vehicle.
Engine Service Panel
1. Remove the seats:
• RZR XP: Remove the driver and passenger seats
• RZR XP 4: Remove the rear passenger seats
2. Turn both latches 1/4 turn to disengage the panel.
1/4 Turn
Latches
RZR XP Shown
3. Lift the panel upward and towards the front of the
vehicle to remove it.
Latch
Lever
Service Panel
9924096 - 2013 RANGER RZR XP 900 / RZR XP 4 900 Service Manual
© Copyright 2012 Polaris Sales Inc.
BODY / STEERING / SUSPENSION
Front Bumper
1. Remove the (2) push rivets from the sides of the front
bumper.
Torx
Screws
2. Remove the (8) Torx screws retaining the upper,
middle and lower portion of the bumper.
3. Disconnect the front head lamp connectors and
remove the front bumper from the vehicle.
Rear Bumper
1. Disconnect the harness connectors at the tail lights.
2. Remove the (10) T-27 Torx screws retaining rear
bumper to the cargo box and vehicle frame.
3. Remove rear bumper from vehicle.
Push
Rivet
5.21
5