Polaris xp 2013 eps Service Manual page 135

11. Install the sprockets onto the camshafts and align the
sprocket marks with the valve cover gasket surface
(see sprocket timing illustration).
IMPORTANT: Intake cam sprocket should have "I"
marks aligned with gasket surface and the exhaust
cam sprocket should have "E" marks aligned with
gasket surface.
IMPORTANT: Install the exhaust cam sprocket first
(opposite the cam chain tensioner) to ensure proper
cam timing.
12. Use new camshaft sprocket retaining bolts upon
assembly. Install the top bolt in each camshaft
sprocket (D). Do not torque the bolts at this time.
D
Install
IMPORTANT: Use new sprocket retaining bolts upon
assembly.
D
9924096 - 2013 RANGER RZR XP 900 / RZR XP 4 900 Service Manual
© Copyright 2012 Polaris Sales Inc.
ENGINE / COOLING
13. Verify cam timing is correct. Flywheel TDC mark
should still be aligned (see Step 1) and cam sprocket
markings should line up as shown.
3
3.77