Polaris xp 2013 eps Service Manual page 280

CLUTCHING (PVT)
8. Tighten the spider jam nut using Clutch Spider Nut
Socket (PU-50578). Torque jam nut to specification.
PU-50578
2871358-A
Spider Jam Nut:
250 ft-lbs (339 Nm)
Apply Loctite® 263™ to threads
9. After the spider and jam nut have been torqued,
remove the clutch assembly from the holding fixture
and inspect the alignment marks made during
disassembly.
IMPORTANT: If the marks illustrated below are not in
alignment upon assembly, the clutch will not be in
balance and the drive clutch assembly must be
replaced.
6.20
Jam Nut
= T
9924096 - 2013 RANGER RZR XP 900 / RZR XP 4 900 Service Manual
© Copyright 2012 Polaris Sales Inc.
10. Install the limiter spacer (A) and the clutch spring (B).
B
DO NOT reassemble the drive clutch without the
limiter spacer. Belt life will be greatly reduced.
11. Install the drive clutch cover (C). Be sure all alignment
marts are in alignment.
C
12. Install cover bolts and torque in a cross pattern evenly
to specification.
Drive Clutch Cover Bolts:
100 in-lbs (12 Nm)
A
CAUTION
= T