Transmission Assembly - Polaris xp 2013 eps Service Manual

TRANSMISSION
16. Torque the locking screw to specification.
8-10 ft-lbs
(11-14 Nm)
Snorkel Locking Screw:
8-10 ft-lbs (11-14 Nm)
8.34
= T
9924096 - 2013 RANGER RZR XP 900 / RZR XP 4 900 Service Manual
© Copyright 2012 Polaris Sales Inc.

Transmission Assembly

IMPORTANT: The snorkel shaft and pinion shaft must
be installed prior to transmission assembly. The
snorkel shaft cannot be installed after assembling the
transmission.
1. Clean both transmission case halves thoroughly.
Inspect case half mating surfaces for damage.
2. Install shift fork (S) and torsion spring into
transmission housing as an assembly. Load spring as
shown in image below
® ™
3. Apply Loctite 242 to (2) screws (T) and install with
retaining plates over shift fork. Torque to specification.
S
Shift Fork Screws:
7-10 ft-lbs (10-14 Nm)
4. Slide engagement dog (U) onto retaining pins of shift
fork.
U
T
= T