Cps Replacement - Polaris RANGER XP 1000 2018 Service Manual

FUEL SYSTEM

CPS REPLACEMENT

1. Lift the rear cargo box to raised position.
2. Disconnect the CPS harness connector
3. Remove CPS wire lead from wire clip
4. Remove CPS retaining fastener
sensor from the stator cover.
5. Install new sensor using a light coating of oil on the
O-ring to aid installation.
6. Torque CPS retaining fastener to specification.
TORQUE
CPS Retaining Fastener:
9 ft-lbs (12 Nm)
7. Route CPS wire lead through wire clip
reconnect CPS harness connector
Make sure CPS harness connector standoff
properly secured.
4.32
q
.
e
.
w
and remove the
e
q
.
NOTE
r
remains
and
9928487 R01 - 2018 RANGER XP 1000 Service Manual
© Copyright Polaris Industries Inc.